System Maintenance; Backup; System Restore; Disk Defragmenting - Keysight Technologies PXA N9030A Getting Started Manual

Instrument Operating System

System Maintenance

System Maintenance

Backup

It is recommended that you have a regular backup strategy. Your IT
department may already have a backup strategy in place which is suitable for
the instrument and its data. Using the Instrument Recovery system in
conjunction with a regular backup strategy should allow full recovery of the
instrument data.
Windows has a Backup utility that you can use to archive files and folders in
case of a disk drive failure. See the Windows Help and Support Center for more
information on this utility. You can also use third party backup utilities.
However, you must ensure that this third party software is compatible with the
instrument's system software. See
page 46
When performing backups, we recommend that you backup the data to an
external storage device connected to the network or one of the instrument's
USB connectors. Also, you should perform backups at times when the
instrument is not being used for normal operations, as it may impact the
instrument's overall performance.

System Restore

Windows contains the capability to restore the system to a previous point in
time. System Restore is enabled with default settings as provided by Microsoft.
However, System Restore is not always 100% successful. Therefore, it is not
recommended that you rely on System Restore to protect your instrument.
System Restore has not been tested to verify successful restoring.

Disk Defragmenting

Over time the instrument's disk becomes fragmented. Windows has a Disk
Defragmenter utility that you can use to defragment the disk. See the Windows
Help and Support Center for more information on this utility.
Running Disk Defragmenter should be performed when the Signal Analyzer
NOTE
application is not running. Measurement throughput will be significantly
impacted while disk defragmentation is in process. To stop the Signal
Analyzer application, press File, Exit. To restart the application, double-click
the application icon on the desktop.
for more information.
66
"Customer installation of software" on