Siemens HiPath 4000 Operating Manual page 94

Additional functions
Step by step
ì
st
Alarm Clock
Activation: u Off v Define the setting.
86
Save the settings.
Save
¼
The alarm clock is activated.
a
Press the On-hook key to end the operation.
Deactivating an alarm/repeating after a pause
The alarm rings for 60 seconds. The following appears
on the display:
alarm repeats after five minutes and then deactivates.
During the alarm:
either:
Press the display key. The alarm deactivates.
Off
or:
Press the display key or any key. The alarm deactivates
Snooze
and is repeated after five minutes. The alarm is repeat-
ed twice and then permanently deactivated.
Deactivating the alarm clock
The handset is in idle status.
©
or w Open the main menu of the handset.
[
Select the menu item and confirm. The input mask for
setting the alarm is displayed.
Save setting.
Save
a
Press the On-hook key to end the operation.
ì
. If you do not press anything, the