Using The Camp-On Function - Siemens HiPath 4000 Operating Manual

Conducting calls – with multiple users
Step by Step
> <
STOP VIEWING?
> <
RELEASE PARTY?
> <
REM LAST PTY?
> <
BASIC SERVICE
> <
Feature settings
> <
Camp-on
Activate
Deactivate
80
[
Select and confirm to end the display.
or:
[
Select and confirm to disconnect this member from the
conference. If there were only three members, the con-
ference is now ended.
Disconnecting the last member added
You wish to disconnect the last member added to the
conference.
[
Select and confirm. The last member added is discon-
nected. If there were only three members, the confer-
ence is now ended.

Using the camp-on function

If you are expecting an important call, you should acti-
vate the camp-on function. A second call will then be
signalled while a call is in progress. You can accept or ig-
nore the second call.
Note:
A second call is not signalled on the Bluetooth
headset.
Activating and deactivating the camp-on function
u Call the system menu.
[
Select and confirm the basic service.
either:
2 1 Enter the service code.
or:
[
Select the menu item and confirm.
[
Select the menu item and confirm.
then: Activating or deactivating
[
Confirm one of the two displays.
[