Data Exchange Between A Pc And A Handset Or Between Two Handsets; Interface Overview; Mobile Phone Manager (Mpm Application) - Siemens HiPath 4000 Operating Manual

Additional functions
Data exchange between a PC and a handset or
between two handsets
You can transfer data between a PC and your handset, or between two
handsets.

Interface overview

The handset supports the following interfaces for data exchange:
Interface
Serial V24 interface
USB interface
Bluetooth interface

Mobile Phone Manager (MPM application)

You can use the MPM application, for example, for read and write access
to your handset phonebook, as well as to load sounds (.mid) and pictures
(.bmp) for the screensaver from the computer to the handset. The MPM
application must be installed on your PC for this purpose. It can be down-
loaded as freeware from the Internet.
"Data Transfer" is shown on the display during data transfer between the
handset and PC. No inputs are possible via the keyboard when this opera-
tion is active and incoming calls are ignored.
The MPM application supports different DECT and GSM handset types.
Terminal functions that are not supported are dimmed and cannot be se-
lected.
For more detailed information, refer to the Mobile Phone Manager help
function.
96
Note:
Only read and write access to phonebook data is permitted via the
Bluetooth interface.
Connect via...
Cable (SLIM Lumberg) PC <-> handset
Cable (SLIM Lumberg) PC <-> handset
Radio, cordless
Data transfer be-
tween...
PC <-> handset and
Handset <-> handset