Expanding A Conference - Siemens HiPath 4000 Operating Manual

Step by Step
> <
Pickup
> <
CONFERENCE
> <
EXPAND CONF.
CONFERENCE
TO WAIT. CALL
> <
CONSULT
Setting up a conference from a second call
p
You are connected to one user and receive a second
call, which is signalled by a warning tone.
[
Select and confirm. You are connected to the second
caller. The other party is placed on hold.
[
Select the menu item and confirm. You will briefly see
the message: "1 is your position". All members are
connected in a conference call.

Expanding a conference

Any member of the system conference can expand the
conference by:
• calling another user and adding this person to the
conference
• adding a user to the conference from a consultation
call,
• accepting a second call and adding the caller to the
conference.
Calling and adding another user
You intend to call another user and to add this person to
the conference.
[
Select the menu item and confirm.
o
Call the new user.
Announce that a conference is to be set up.
[
Confirm.
The user is added to the conference.
If the new user does not answer:
[
Confirm.
Expanding the conference from a consultation call
You wish to make a consultation call during the confer-
ence.
[
Select the menu item and confirm. The conference is
placed on hold.
o
Call a user. Make the consultation call.
Conducting calls – with multiple users
77