Siemens HiPath 4000 Operating Manual page 40

Setting the handset
Step by step
Ð
st
H/Set Settings
st
Display
st
Lighting
u On v
Outside Charger:
u On v
Ð
st
H/Set Settings
st
Handset
st
Select Base
st
<Base>
Edit Name:
o
and possibly
32
Lighting
You can set whether the display should light up when
the handset is in the charging shell or if it is out of the
charging shell.
©
or w Open the main menu of the handset.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm. The mask for setting
lighting is displayed.
Enable or disable activation.
In Charger:
s Move the cursor down one line.
Enable or disable activation.
Save setting.
Save
a
Press the On-hook key to end the operation.
Base station name
You can change the base station name that is displayed
in idle status. The handset must be registered at the
corresponding base.
©
or w Open the main menu of the handset.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
[
Select the menu item and confirm.
The selected base is activated. The activated base is
ticked. It can be deactivated by selecting another base.
Change the settings.
Change
X
Delete text.
X
Enter the required text and correct individual characters
as necessary using the "Delete" Display key.
Save the settings.
Save
a
Press the On-hook key to end the operation.