Activating Or Deactivating The Ringer; Activating Or Deactivating The Warning Tone - Siemens HiPath 4000 Operating Manual

Step by step
TURN RING OFF

Activating or deactivating the ringer

Deactivating the ringer
*
Hold down the key until a confirmation tone is emitted.
The ringer is deactivated.
Activating the ringer
*
Hold down the key until a confirmation tone is emitted.
Deactivating the ringer for the current call
either:
Press the display key.
or:
*
Hold down the key until the ringer is deactivated.
Reactivate the ringer after the call so that the handset
uses the ringer to signal the next call.
Activating or deactivating the warning
tone
When you activate the warning tone, all other tones are
deactivated. An incoming call is signalled by this brief
tone.
If the handset is in a call pickup group, a pickup call is
also signalled by the warning tone.
Activating the warning tone
*
Hold down the key until a confirmation tone is emitted.
Press the Display key within three seconds.
Beep on
The warning tone is activated. The volume of the warn-
ing tone corresponds to the volume of the external ring-
er.
Deactivating the warning tone
*
Hold down the key until a confirmation tone is emitted.
Setting the handset
27