Siemens HiPath 4000 Operating Manual page 48

Conducting calls – enhanced functions
Step by step
c
ý
st
Data Transfer
st
Bluetooth
st
Trusted Devices
S55 Headset
st
Delete Entry
40
Conducting calls via the Bluetooth headset
Activating the Bluetooth headset during a call
If the handset is in dial or call mode (see
information on setting up a call), the Bluetooth headset
can assume the receiver inset and microphone func-
tions.
Press the Talk key on the Bluetooth headset (see the
user manual supplied with your headset).
Accepting a call on the Bluetooth headset
The headset uses a call tone to signal an incoming call.
Press the Talk key on the Bluetooth headset (see the
user manual supplied with your headset).
Deactivating the Bluetooth headset during a call
You are conducting a call via the Bluetooth headset.
d
Press the Talk key or Speakerphone key on the handset.
or
The Bluetooth headset is deactivated. You can continue
the call directly on the handset.
Deregistering the Bluetooth headset at the handset
To improve protection against unauthorised tapping, de-
register the Bluetooth headset at the handset if you no
longer wish to use it.
©
or w Open the main menu of the handset.
[
Select the menu item and confirm.
[
Select the menu item and confirm. The Bluetooth menu
is displayed.
[
Select the menu item and confirm. The name of the
registered or detected Bluetooth headset is displayed.
Open the handset's menu
Options
[
Select the menu item and confirm. The Bluetooth head-
set is deregistered and can no longer be detected by
the handset.
Page 3 for