Siemens HiPath 4000 Operating Manual page 23

2. Opening the battery compartment
Insert a screwdriver into the groove between battery cover and the jack (1),
grip the cover firmly and lift it off the battery compartment (2).
3. Inserting the battery pack
Insert the battery pack nose first and at an angle (3). Then press it down
into the compartment until the battery pack's positioning clip firmly snaps
into place (4).
Note:
To remove the battery pack, you must first press the lateral posi-
tioning clip.
4. Closing the battery compartment
Position the battery cover over the compartment's catches so that they can
snap into place (5). Then press the battery cover down until it snaps into
place (6).
2
4
3
6
5
Putting the handset into service
1
5
15