Replacing The Leg Actuators - Invacare Jasmine User Manual

3. Remove the hardware that secures the bottom of the
boom actuator to the boom actuator mast mounting
bracket.
a. Remove the rubber caps from the locknut and socket
head screw.
b. Remove the socket head screw, washer, bearing,
nylon washers, bushing, bearing, washer, flat washer
and locknut.
4. Reverse STEPS 1–3 to replace the boom actuator.
CAUTION!
Improper assembly may cause injury or damage.
– DO NOT overtighten the mounting hardware.
This will damage the mounting bracket.
1195053-B

8.6 Replacing the Leg Actuators

This procedure should only be performed by a
qualified technician.
If the legs A of the patient lift do not open and
close properly, it may be necessary to replace one or
both of the leg actuators.
Maintenance
53