Environmental Conditions; Materials; Electric Lifts - Invacare Jasmine User Manual

Battery
Insulation Class
Intermittens
Battery capacity
Manual emergency lowering
Electric emergency lowering/lifting
*CSP = central suspension point
**Varies depending on load and stroke
*** The degree of protection describes the ability of
the device to protect users from accessing hazardous
parts, and the protection against the ingress of water
and other foreign objects.

9.2 Environmental Conditions

Operating temperature
Operating air humidity
Sound pressure
Atmospheric pressure
Storage temperature
Storage air humidity
Storage atmospheric
pressure
1195053-B
IPX5
Class II equipment,
Type B applied part
10%, max, 2
minutes/18 minutes
2,9 Ah
Yes
Yes
5°C to 40°C
20% to 90% at 30° C —
not condensing
45–50 dB(A)
700 hPa to 1060 hPa
above 0°C
less than 60%
700 hPa to 1060 hPa

9.3 Materials

Component
Actuator housing Plastic — ABS
End boom plug,
mast base handle, Plastic — PA
washers, spacers
Battery bracket,
pins, bushings,
screws, tie rods,
washers, carabiner,
clips, nuts
Bolts
Retainer wire
Stainless steel
Mast, boom, push
handle, legs, base
support plate, sling
attachment hooks,
hanger bar frame

9.3.1 Electric Lifts

Invacare® is continuously working towards ensuring that the
company's impact on the environment, locally and globally,
is reduced to a minimum. We comply with the current
environmental legislation (e.g. WEEE and RoHS directives).
We only use REACH compliant materials and components.
Technical data
Protection
Material
n/a
n/a
Steel Zinc plate
CrNiMo Zinc plate
n/a
Steel Powder coat
61