Table of Contents
Advertisement
4.7 Insert tubes
To be used when mounting M or L rail end hunged to wall, when
coupling two rails, or when mounting rails diagonally in a room.
Insert tube for rail profile M is supplied in standard length of 800 mm.
Insert tube for rail profile L is supplied in standard length of 1000 mm.
Insert tube is supplied in white or anodized in natural.
Insert tube is supplied in arrange for the particular mounting situation.
4.8 Wall support leg, console and wall support foot
Wall support leg
Wall support leg are supplied in the lengths of 2600 mm and 3000 mm.
Console
To be used if the wall does not have sufficient carrying capacity
when mounting the rail to the wall.
May be used for the mono rail systems as well as the traverse systems.
To be installed with console and support as illustrated in the installation
instructions.
Floor support
Console
To be used along with wall support, as the part which the rail is mounted onto.
The console is also used together with the end hung wall bracket when
mounting straight or diagonal.
Wall support foot
Foot
Low foot.
To be used in rooms without skirting along the floor.
High foot.
To be used in a room where there is skirting board pan along the floor.
4.9 End stop
The end stop is mounted at all rail outlets, which ensures that the trolleys do not leave the rail system.
When the end stop is mounted, the rubber plug is to face towards the trolley.
When the traverse system is between-hung, the traverse rails end stop is to be mounted in the traverse trolley.
12
Advertisement
Table of Contents
