Safe Assembly; Assembling The Mast To The Base - Invacare Jasmine User Manual

Invacare® Jasmine™

4.2 Safe Assembly

WARNING!
Risk of Injury or Damage
Improper assembly may cause injury or damage.
Use of incorrect or improper parts, including
replacement (service) parts, may cause injury or
damage.
– Assembly MUST be performed only by qualified
personnel.
– Use only Invacare parts in the assembly of this
patient lift. The base, legs, mast, boom and
hanger bar are manufactured to specifications
that assure correct alignment of all parts for
safe functional operation.
– Replacement parts MUST match original
Invacare parts.
– ALWAYS provide the lift serial number to assist
in ordering the correct replacement parts.
– DO NOT overtighten the mounting hardware.
This will damage the mounting bracket.
Risk of Injury or Damage
There is a risk of squeezing of both limbs and
wires during assembly and disassembly of the lift.
– Activate the emergency stop before assembly or
disassembly to prevent entrapment/squeezing.
– Take the utmost care when lifting components
during assembly. Some parts are heavy. Always
remember to adopt the correct lifting position.
16
The following tools are required to assemble the
patient lift: 1/2" wrench (spanner) and 3/16" Allen
key.
If there are any issues or questions during assembly,
contact a local Invacare representative. Refer to the
contact information in the back of this manual.

4.3 Assembling the Mast to the Base

WARNING!
Risk of Fire
Incorrect electrical connections can cause fire.
– Before making electrical connections, inspect
connectors for damage. If damage is found,
contact an Invacare dealer or qualified
technician for service.
– Ensure electrical connectors are completely
connected.
– Ensure electrical connectors are connected to
the correct components.
– DO NOT force connectors together. If
connections are not easy and smooth, verify
the correct components are being connected.
Contact Invacare, a dealer or a qualified
technician for service.
1195053-B