Replacing The Electric Actuator - Invacare RPS350-1 User Manual

Replacing the Electric Actuator

1. Remove the bottom nut, washer and shoulder bolt that secure the electric actuator to the mast mounting bracket.
2. Rest the lift arm on your shoulder and remove the top nut, bolt, bracket and bushing from the lift arm mounting bracket.
3. Remove the electric actuator.
4. Reverse STEPS 1‐3 to install the new electric actuator.
DO NOT overtighten mounting hardware. This will damage mounting brackets.
Part No. 1078984
WARNING
Bolt
Washer
Bushing
Bolt
Washer
Bushing
FIGURE 7.3 Replacing the Electric Actuator
23
Bracket
Bolt
Washer
Bolt
Washer
SECTION 7—MAINTENANCE
Stand Up Patient Lift