ELECTRO FREEZE SLX400C Operator's Manual page 21

5 Part Names and Functions
Figure 5-2 Beater Shaft Assemblies
The following descriptions refer to figure 5-2. The number preceding the part name
corresponds to the number in the figure.
1.) BAR - BREAKER: Keeps product
blended in the center of the beater
shaft.
2.) SHAFT - ASSY. BEATER: Rotates
in the freezing cylinder, blending
air and mix. Ejects product when
dispensing plunger is opened.
3.) BLADE - SCRAPER: Scrapes the
frozen product from the freezing
cylinder.
184582-01
ELECTRO FREEZE Soft Serve Models SLX400C
(continued)
4.) SEAL - BEATER SHAFT: Seals
the opening between the freezing
cylinder and the beater shaft.
Consists of the following:
5.) SEAL - BEATER SHAFT:
6.) WASHER-DOUBLE SHAFT
SEAL
11