ELECTRO FREEZE SLX400C Operator's Manual page 22

ELECTRO FREEZE Soft Serve Models SLX400C
5 Part Names and Functions
Figure 5-3
The following descriptions refer to figure 5-3. The number preceding the part name
corresponds to the number in the figure.
1.) TUBE - MIX FEED: Meters the
2.) SLEEVE - REAR MIX FEED:
3.) INSERT - MIX FEED TUBE: Used
4.) O-RING - TUBE: Seals the opening
12
Mix Feed Tube Assembly
correct amount of mix and air
into the freezing cylinder from the
hopper.
Provides adjustment on mix feed
rate and a positive shut-off of mix
flow to the freezing cylinder.
to create the proper air/mix ratio in
the mix feed tube.
between the hopper and mix
feed tube. (O-rings do not need
lubrication.)
(continued)
184582-01