Priming Instructions For Freezers Built Into A Wall - ELECTRO FREEZE SLX400C Operator's Manual

10.2.2 Priming Instructions for Freezers Built into a Wall

1. Place a bucket under the dispense
2. Fill mix hopper with one gallon of mix
Failure to completely remove sanitizer
or water from the freezing cylinder
before placing in
damage the freezer.
3. Press the
4. Repeat Steps 1 - 3 for the other side
5. Sanitize and install nozzles.
"OPEN" - READY TO SERVE
Figure 10-5 "OPEN" — position
184582-01
ELECTRO FREEZE Soft Serve Models SLX400C
head. Remove the actuator rod from
the spigot. Leave spigot open. (figure
10-4)
and allow mix to push out remaining
sanitizer. When pure mix is flowing
from the dispense head close the
dispense handle (figure 10-4).
Reinstall the actuator rod.
Important:
freeze will
freeze button to start
the freezer..
of the freezer.
"CLOSED"-FILL WITH MIX
Figure 10-6 "CLOSED" — position
31