Winter Storage - ELECTRO FREEZE SLX400C Operator's Manual

ELECTRO FREEZE Soft Serve Models SLX400C
13 ROUTINE MAINTENANCE
To protect the unit during seasonal shutdown, it is important to store the
freezer properly. Use the following procedures:
1. Disconnect all power to the freezer.
2. Disassemble and wash all parts that come into contact with the mix using
3. Store the loose parts, such as the head assembly and beater assembly, in
4. Do not lay heavy objects on the plastic or rubber parts.
5. Cover the freezer and all loose parts to protect them from dust or other
6. If you have an air cooled freezer, have condenser fins cleaned by an
7. On water-cooled freezers, disconnect the water supply. Use compressed
The water valve must be opened in order to blow out the condenser.
Failure to purge the freezer of water can result in severe damage to the
refrigeration system. Call your Electro Freeze Distributor for service.
8. When freezer is restarted after seasonal shutdown, remember to replace
USE ONLY ORIGINAL OR AUTHORIZED REPLACEMENT PARTS WITH THIS FREEZER.
If you have any questions on items that are not included in this schedule or problems that
require service assistance, please call your local distributor or H.C. Duke & Son, LLC, Electro
38

WINTER STORAGE

a warm, mild detergent solution. Rinse in clear water and air dry all parts
thoroughly. Clean drain tube and all exterior panels.
a safe dry place.
elements that could contaminate them while in storage. Place the freezer
in a dry location.
authorized service technician.
air to blow out all remaining water in the condenser.
all o-rings and seals with new parts. Rubber parts can lose their elasticity
and ability to seal when stored.
Freeze, Service Department for factory service assistance.
Phone: (309) 755-4553 or (800) 755-4545
E-mail: service@electrofreeze.com
Important:
FAX: (309) 755-9858.
184582-01