ELECTRO FREEZE SLX400C Operator's Manual page 24

ELECTRO FREEZE Soft Serve Models SLX400C
6 Operator Controls
6.2 Left Side Controls (2)
Indicates controls for left side cylinder and
hopper. "Right" Indicates controls for right
side of freezer.
6.3 Indicates Mode of Operation (3)
There are three primary modes of operation:
a. OFF –This is the indicator when power
is applied to freezer and when (OFF)
button is pressed. In this mode, the
refrigeration and beater motor will not
operate.
b. FRZ – This is the indicator when
Freeze button is pressed. In this
mode, the freezer is in automatic freeze
mode and both the beater motor and
refrigeration will activate as needed. Use
this position for dispensing product from
freezer. Hopper will also be refrigerated
as needed to maintain product below
41°F.
6.4 OFF Indicator
When this symbol is pressed, the left side
of unit will shut off. The beater motor and
compressor will not operate.
6.5 Function Buttons (Four) (5)
Pressing any of these buttons will activate
the icon directly above in the display
screen.
6.6 Information Window (6)
This window is normally blank when unit
is functioning properly. This window will
give you indication when mix in hopper
is low and other error messages. Refer
to Troubleshooting Section of manual for
details on error messages.
6.7 Wash or Clean Mode
Press the function button directly below
icon to activate the wash menu screen.
14
(continued)
(4)
(7)
Important:
Do not use the freeze position
with water or sanitizer in the cylinder
or hopper. The freezer will be
damaged.
c. Night – This is the indicator when
Night button is pressed. In this mode,
an energy-saving feature will activate
and reduce product refrigeration. The
freezer will automatically cycle to maintain
temperatures in the cylinder and hopper
below 41°F and keep product from
deteriorating. Use this position when the
freezer will not be in use for periods of
more than one hour.
Low
MIX
184582-01