Part Names And Functions - ELECTRO FREEZE SLX400C Operator's Manual

ELECTRO FREEZE Soft Serve Models SLX400C
5

Part Names and Functions

Figure 5-1 Head Assembly
The following descriptions refer to figure 5-1. The number preceding the part name
corresponds to the number in the figure.
1.)
2.)
3.)
4.)
5.)
10
HEAD - DISPENSE: Encloses
the freezing cylinder and provides
an opening for product to be
dispensed.
O-RINGS - HEAD: Seals the head
to the freezing cylinder. Must be
lubricated.
PLUNGERS - DISPENSE - SIDE:
Seals the product opening in the
head when closed. Allows product
to flow when open.
O-RINGS - PLUNGER: Seals
the plunger in the head. Must be
lubricated to seal and slide freely.
PLUNGER - DISPENSE -
CENTER: Seals the product
opening in the head when closed.
Combines ice cream from both
cylinders to form swirl cones.
6.) ROD - PLUNGER: Starts the
freezer when dispensing. Must be
in place for proper operation.
7.) PIN - HANDLE: Secures handle to
the head.
8.) KNOB - HAND: Secures the head
to the freezing cylinder.
9.) HANDLE - DISPENSE - SIDE:
Opens and closes the plunger to
start and stop the flow of product
from the freezer.
10.) HANDLE - DISPENSING -
CENTER: Opens and closes the
plunger to start and stop the flow
of swirl product from the freezer.
11.) NOZZLE - SERRATED: Forms the
frozen product as it is dispensed.
184582-01