Install The Display; Figure 2-8 Rack Mount Display Mounting Hole Locations - Will Burt D-Tect 5354901 Operator's Manual

2. Secure the Installation Bracket to the antenna fixture with customer-supplied hardware.
The mounting hardware must include a proper means to resist vibration loosening such
as thread-locking compound or locking hardware. Torque all hardware as appropriate for
its size and grade.

2.5.2.4 Install the Display

Depending on the customer specification, the Display may be a:

Rack Mount Display (P/N: 5354801)

Wall Mount Display (P/N: 5354701)
Follow the installation instructions appropriate for your system.
The Display should be mounted:

Inside the vehicle

Where the alphanumeric display screen is visible while operating the mast

So that there is easy access to the connectors (J3, J4, J5, and J6) on the Display
Rack Mount Display Installation
To install the Rack Mount Display:
1. Position the Rack Mount Display in the desired mounting location.
2. Secure the Rack Mount Display at the mounting holes in position with customer-supplied
hardware (Figure 2-8). The mounting hardware must include a proper means to resist
vibration loosening such as thread-locking compound or locking hardware. Torque all
hardware as appropriate for its size and grade.
Mounting Holes
TP-5522901-00
July 2018

Figure 2-8 Rack Mount Display Mounting Hole Locations

'
D-TEC O M
PERATOR S
Mounting Holes
ANUAL
2-13