Installation Equipment; Table 2-1 Equipment Recommended For Installation - Will Burt D-Tect 5354901 Operator's Manual

'
D-TEC O M
PERATOR S
Equipment Damage – Qualified Personnel! All persons installing and maintaining this
equipment should be suitably qualified and work to local, regional, and national standards and
codes of practice.

2.2 Installation Equipment

Table 2-1 lists equipment recommended for installation.
Personal Protective
Safety Glasses
Hearing Protection
Hand Tools
¼" Drill
Hand Drill
Screwdrivers
Multimeter
* Note:

Depending on the local, regional, and national standards and codes of practice, and the environment,
additional personal protective equipment may be necessary.

Depending on the configuration, additional equipment, including but not limited to electrical components
(e.g. wire, switches, fuses, circuit breakers, etc.), may be required.

When disposing of any disposables or components, do so according to any applicable local, regional, and
national standards and codes of practice.
2-2
ANUAL

Table 2-1 Equipment Recommended for Installation

Recommended Equipment*
Work Gloves
Hard Hat or Helmet
Crimping Tool or Solder Set
Hex Wrenches
Wire Cutter / Stripper
Nitrile or Vinyl Gloves
Safety Shoes
Electrical Tape
Hook-Up Wire
Wrenches
TP-5522901-00
July 2018