Rack Mount Display (P/N: 5354801) (Rack Mount Kits Only); Figure 1-2 Rack Mount Display - Will Burt D-Tect 5354901 Operator's Manual

1.5.2 Rack Mount Display (P/N: 5354801) (Rack Mount Kits only)

The Rack Mount Display (Figure 1-2):

Is mounted inside the vehicle on a rack mount

Is wired into the mast Air Control Valve (pneumatic masts) or the Stiletto Control (Stiletto
masts)

Stops mast extension in the event of a hazardous condition

Communicates with the Sensor over an RS-485 link (Section 1.5.1)

Operates as the communications master with the Sensor (The Display initiates all
communication)

Includes an eight character alphanumeric LED display, a speaker output for audible
alarms and messages, inputs for switches, and a relay to enable or disable operator
engagement of a remote Air Control Valve (for raising the mast)

Performs self-diagnostic routines each time the unit is powered up
System Ready LED
Electric Field LED Magnetic Field LED
J6
TP-5522901-00
July 2018
Alphanumeric Display
Front of Rack Mount Display
J5 J4 J3
Back of Rack Mount Display

Figure 1-2 Rack Mount Display

'
D-TEC O M
PERATOR S ANUAL
1-5