Section 1 Introduction; Safety Precaution Notification - Will Burt D-Tect 5354901 Operator's Manual

Section 1
Review this manual in its entirety. Contact The Will-Burt Company with any questions before
performing any procedure outlined in this manual. The views depicted in this manual are
provided for clarification and are subject to change without notice. Views are not to scale.
This manual describes installation, operation, maintenance, and troubleshooting procedures for
the D-TEC Safety System.
This manual is for the following D-TEC Safety Systems:

P/N: 5354501 (Rack Mount D-TEC System)

P/N: 5354601 (Wall Mount D-TEC System)
This manual is not for the following D-TEC Safety Systems:

P/N: 4370401 (Obsolete Rack Mount D-TEC System)

P/N: 4370402 (Obsolete Wall Mount D-TEC System)
Contact The Will-Burt Company for information on these and other Will-Burt products.
The D-TEC is a safety device which:

Mounts at the highest point of the mast/payload configuration

Provides overhead power line detection

Provides above-the-mast illumination
This unit is intended as a safety tool and in no way is a substitute for common sense and
caution.

1.1 Safety Precaution Notification

Refer to the Safety Summary for precautions to be observed while installing, operating, or
maintaining this equipment.
TP-5522901-00
July 2018
Introduction
'
D-TEC O M
PERATOR S ANUAL
1-1