'
D-TEC O
M
PERATOR
S
1.5.3 Wall Mount Display (P/N: 5354701) (Wall Mount Kits only)
The Wall Mount Display (Figure 1-3):
Is mounted inside the vehicle on a wall
Is wired into the mast Air Control Valve (pneumatic masts) or the Stiletto Control (Stiletto
masts)
Stops mast extension in the event of a hazardous condition
Communicates with the Sensor over an RS-485 link (Section 1.5.1)
Operates as the communications master with the Sensor (The Display initiates all
communication)
Includes an eight character alphanumeric LED display, a speaker output for audible
alarms and messages, inputs for switches, and a relay to enable or disable operator
engagement of a remote Air Control Valve (for raising the mast)
Performs self-diagnostic routines each time the unit is powered up
Electric
Field LED
Magnetic
Field LED
1-6
ANUAL
System Ready LED
J3
J4
Figure 1-3 Wall Mount Display
Alphanumeric Display
J5
J6
TP-5522901-00
July 2018