2.5 Physical Installation
This section describes physical installation of the D-TEC.
2.5.1 Physical Installation Quick Summary
The following is a quick summary of physical installation of the D-TEC. Detailed steps follow the
quick summary (Section 2.5.2).
In general, physically install the D-TEC as follows:
1. Select Suitable Mounting Locations (Section 2.5.2.1)
2. Unpack the D-TEC (Section 2.5.2.2)
3. Install the Sensor (Section 2.5.2.3)
4. Install the Display (Section 2.5.2.4)
2.5.2 Physical Installation Detailed Instructions
The following are detailed steps describing physical installation of the D-TEC. The exact
installation procedures may vary based on the installation environment. Use the best and safest
method for your circumstances.
TP-5522901-00
July 2018
'
D-TEC
O
M
PERATOR
S
ANUAL
2-9