Installation Bracket; Figure 1-4 Installation Bracket; Table 1-3 Installation Bracket Options - Will Burt D-Tect 5354901 Operator's Manual

'
D-TEC O M
PERATOR S

1.5.5 Installation Bracket

The 18 inch (45.72 cm) Installation Bracket (Figure 1-4) is used to position the Sensor above
the payload.
Table 1-3 lists Installation Bracket options.
P/N Description*
5524101 18" Black Powder Coat Installation Bracket (Standard Version)
5524102 18" White Powder Coat Installation Bracket
* Note: The current version of D-TEC Sensor is smaller than the previous version of the D-TEC Sensor. To allow
for easy retrofitting of old-style systems to the current system, the D-TEC now ships standard with an 18 inch
(45.72 cm) Installation Bracket rather than the previously used 14 inch (35.56 cm) bracket. Using the 18 inch
Installation Bracket will position the Sensor in the same location that the previous Sensor would have been
positioned using a 14 inch bracket.
1-8
ANUAL

Figure 1-4 Installation Bracket

Table 1-3 Installation Bracket Options

TP-5522901-00
July 2018