Switch Pc Software Mode On / Off - FP POSTBASE ONE Operator's Manual

11.15

Switch PC Software Mode on / off

You can set up the mailing system in such a way that metering is only possible when
connected to a PC and special FP software for PostBase mailing systems
(RemoteOne, ReportOne or MailOne 2.0). Thus, you can make sure that all meter-
ings are registered on the PC for reporting and analysis purposes.
For information on RemoteOne, ReportOne and MailOne 2.0, please visit our website
or contact your local FP representative.
PC Software Mode – possible settings and their meaning:
Advanced settings & system information
• Open the M
• Choose PC S
PostBase One opens the adjustment menu
for the PC Software Mode. The current set-
ting is shown on a dark background.
• Select the desired setting.
• S the setting shown.
AVE
O PostBase One meters only if data exchange
N
between postage meter and PC is possible,
i.e.
– the PC is connected to the postage meter
( interface) via USB and
– the FP software is connected to the
PostBase One.
All meterings are automatically registered by
the FP software.
O Metering is possible with and without PC con-
FF
nection.
Meterings without RemoteOne / ReportOne /
MailOne 2.0 (so called Offline Postage) are
not registered on the PC. You can manually
book those meterings afterwards with the FP
software in use.
.
ENU
M .
OFTWARE ODE
93