FP POSTBASE ONE Operator's Manual page 163

Mounting the protective glass to the postage meter
Transport bar
Mounting the hand feed tray
Appendix – Moving the PostBase One to another location
Remove the bar that was attached for trans-
port:
• Remove the four screws.
• Remove the transport bar.
• Fasten the protective glass to the housing
of the postage meter with the four screws.
If you use PostBase One with no additional
components:
• Mount the hand feed tray on the left side of
the postage meter's housing.
Insert the three pegs into the key holes of
the side wall of the postage meter.
• Push the hand feed tray backwards as far
as it will go.
163