FP POSTBASE ONE Operator's Manual page 31

PostBase One with hand feed tray
PostBase One with feeder
Printing the test print on an envelope
• Place an empty envelope (or a post card)
on the hand feed tray:
– The side to be printed faces the back.
– Envelope flap to the bottom (envelope
stands on its upper edge).
• Push the envelope a few centimeters in the
direction of the arrow and let go of it.
Letter transport starts automatically as soon
as the sensor recognizes the envelope.
PostBase One automatically feeds the enve-
lope, prints a test print, and exits the enve-
lope to the right side.
Positioning an envelope on the feeder
(optional)
• When PostBase One prompts you to posi-
tion a letter, place an empty envelope (or a
post card) on the feeder:
– The side to be printed faces the back.
– Envelope flap to the bottom (envelope
stands on its upper edge).
The feeder starts automatically.
PostBase One feeds the envelope, prints a
test print, and exits the envelope to the right
side.
Or:
If an envelope has already been positioned at
the feeder:
• Start the feeder with the F
For detailed information on how to position
letters on the feeder, please read page 52.
The basics of operation
button.
EEDER
31