FP POSTBASE ONE Operator's Manual page 51

Adjust the letter path to the letter thickness
Sealing function ON / OFF
Dynamic weighing YES / NO
Setting up the feeder
• Adjust the letter path to the thickness of the
Adjust separation • If necessary, check / adjust the separation
Switching the sealing function on / off
(PostBase One with sealer)
• On the sealer: Turn the envelope sealing
Check the dynamic scale's status
(PostBase One with dynamic scale)
If you want the dynamic scale to detect letter
size and weight:
• Make sure that the product is set to
Only when the Home screen shows the
icon as the current weighing mode, the
'dynamic weighing' function is active. Other-
wise the dynamic scale only transports let-
ters.
mail pieces to be processed.
Letter thickness:
– up to 0.08" (2 mm)
– 0.12" to 0.2"
(3 mm to 5 mm)
– more than 0.2"
(5 mm)
(See also chapter 3.5.1, page 16.)
settings. Please refer to chapter 3.5.2,
page 17.
switch to the corresponding position.
Moisten / seal letters
(sealing function ON)
Sealing function OFF
(See also chapter 3.6, page 21.)
'Dynamic'.
Metering
Letter path:
Narrow
Medium
Maximum
SEAL
NON
SEAL
51