Connection To Data Center - FP POSTBASE ONE Operator's Manual

11.9

Connection to data center

On commissioning through the FP Customer Service, setting up the connection to the
data center is part of the installation routine. You should check and – if need be – cor-
rect the settings if changes were made to your equipment / system environment.
When in doubt, contact your network administrator.
Advanced settings & system information
• Open the M .
ENU
• Choose M
ANAGE
PostBase One shows the current connectiv-
ity settings.
Changing the settings
• Press C .
HANGE
• Simply follow the instructions on the
display. PostBase One successively
prompts you to specify all necessary
details.
When finished, PostBase One displays the
current connection configuration.
• If everything is correct: S
The chart on the following pages gives an
overview of the possible settings and param-
eters.
C .
ONNECTION
.
AVE
85