FP POSTBASE ONE Operator's Manual page 107

Caution! Do not touch the nozzle surface.
Always keep unprotected nozzles facing
down. Handle print heads without nozzle
protection with extreme care.
• Carefully remove the nozzle protection.
• Hold the print head with its connectors fac-
ing backwards, i.e. towards the back of the
mailing system.
• Insert the print head into its bracket.
• Push down the print head as far as it goes.
• Finally, push the print head back gently – it
will then tilt into the bracket.
• Insert the second print head in the same
way.
Maintenance and care
107