FP POSTBASE ONE Operator's Manual page 159

Installing the PostBase One mailing system on a new location
Feeder
Static scale
Caution! Please observe the following notes on systems with a dynamic
scale:
• Have the mailing system installed by a service technician.
• As for the choice of the place of installation, make sure that the feeder and
the dynamic scale rest on the same base (table / pedestal base).
• By no means must the base vibrate or be mechanically unstable.
Appendix – Moving the PostBase One to another location
Sealer
Dynamic scale
Location • Make sure that the new location meets the
following requirements:
– room temperature: 59 °F to 95 °F
– not exposed to direct sunlight
– relative humidity:
– power socket in the immediate vicinity
– network connection.
Postage meter
(+15 °C to +35 °C)
20 % to 70 %, non-condensing
Power Sealer
Letter catch tray
159