Modifying Tone Settings - Roland XV-5080. Owner's Manual

Chapter 10 Examples of Applications Using the XV-5080
MFX Control Destination
Selects the Multi-effects parameter to be controlled using the
MFX Control 1–4 source. The parameters that can be selected
depend on which type of Multi-effects is set to MFX Type.

Modifying Tone Settings

You can use the Matrix Control parameter to control Tone
settings in realtime.
Selecting the MIDI Messages Used for
Control and the Parameters to Be
Changed
1. Select the Patch you're going to use.
2. Press [F5 (LFO&CTL)].
3. Press [F3 (Control)].
4. Press [
]/[ ]/[
the parameter you want to set.
5. Turn the VALUE dial, or press [INC]/[DEC] to select the
desired value.
* If you've made a mistake, simply press [UNDO]. The value of
the parameter will be restored to what it was when you first
positioned the cursor there.
6. Press [EXIT] to return to the PATCH PLAY page.
Matrix Control 1–4
Source (Matrix Control Source)
Assign one of the following controllers to Matrix Control
Source. If you wish to use a controller that will apply to all
Patches, or a controller that cannot be directly selected here,
select SYS-CTRL1–4, and then select the controller using the
System Control Source parameters (SYSTEM Control screen).
Available Settings:
OFF: No controller is used.
CC01–CC95: Controller numbers 1–95 (except for 32)
BENDER: Bender
AFTERTOUCH: Aftertouch
SYS-CTRL1: System controller 1
SYS-CTRL2: System controller 2
SYS-CTRL3: System controller 3
SYS-CTRL4: System controller 4
VELOCITY: Velocity
KEYFOLLOW: Keyfollow
TEMPO: Tempo
LFO1
218
]/[ ] to move the cursor to
LFO2
PITCH-ENV: Pitch envelope
TVF-ENV: TVF envelope
TVA-ENV: TVA envelope
Destination
Selects the parameters to be controlled.
OFF: No control
PITCH
TMT
Effects parameters ([PATCH] - [F6 (Effects)] (p. 26))
DRY LEVEL
CHORUS SEND
REVERB SEND
MFX CTRL1
MFX CTRL2
MFX CTRL3
MFX CTRL4
WG parameters ([PATCH] - [F2 (WG)] - [F1 (WG Prm)] (p.
136))
FXM DEPTH
LFO parameters ([PATCH] - [F5 (LFO&CTL)] p. 145)
LFO1 PCH DEPTH
LFO2 PCH DEPTH
LFO1 TVF DEPTH
LFO2 TVF DEPTH
LFO1 TVA DEPTH
LFO2 TVA DEPTH
LFO1 PAN DEPTH
LFO2 PAN DEPTH
LFO1 RATE
LFO2 RATE
PITCH parameters ([PATCH] - [F2 (WG)] - [F1 (Pch Env)]
p. 138)
PIT ENV A-TIME
PIT ENV D-TIME
PIT ENV R-TIME
TVF parameters ([PATCH] - [F3 (TVF)] (p. 140))
CUTOFF
RESONANCE
TVF ENV A-TIME
TVF ENV D-TIME
TVF ENV R-TIME
TVA parameters ([PATCH] - [F4 (TVA)] (p. 143))
LEVEL