Roland XV-5080. Owner's Manual page 63

Output
Level (Output Level)
Adjust the output level.
36: FLANGER DELAY
This effect connects a flanger and a delay in series.
fig.2-42
Balance D
L in
Feedback
Balance W
Flanger
Balance W
R in
Balance D
Flanger
Pre Delay (Flanger Pre Delay Time)
Adjust the time delay from when the direct sound begins
until the flanger sound is heard.
Rate (Flanger Rate)
Adjust the modulation speed of the flanger effect.
Depth (Flanger Depth)
Adjust the modulation depth of the flanger effect.
Feedback (Flanger Feedback)
Adjust the proportion (%) of the flanger sound that is fed
back into the effect. Negative (-) settings will invert the
phase.
Balance (Flanger Balance) #
Adjust the volume balance between the direct sound and the
flanger sound. With a setting of "D100: 0W," only the direct
sound will be output. With a setting of "D0: 100W," only the
flanger sound will be output.
Delay
Time (Delay Time)
Adjust the time delay from when the direct sound begins
until the delay sound is heard.
Feedback (Delay Feedback)
Adjust the proportion (%) of the delay sound that is fed back
into the delay input. Negative (-) settings will invert the
phase.
HF Damp (Delay HF Damp)
Adjust the frequency above which delayed sound fed back to
the delay input will be cut. If you do not want to cut the high
frequencies of the delay feedback, set this parameter to
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Chapter 2 Using the XV-5080 Effects
BYPASS.
Balance #
Adjust the volume balance between the flanger sound that is
sent through the delay and the flanger sound that is not sent
through the delay. With a setting of "D100: 0W," only the
flanger sound will be output. With a setting of "D0: 100W,"
only the flanger sound that is sent through the delay will be
output.
Output
Level (Output Level)
Adjust the output level.
37: CHORUS FLANGER
This effect connects a chorus and a flanger in series.
fig.2-43
Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Chorus
Pre Delay (Chorus Pre Delay Time)
Adjust the time delay from when the direct sound begins
until the chorus sound is heard.
Rate (Chorus Rate)
Adjust the modulation speed of the chorus effect.
Depth (Chorus Depth)
Adjust the modulation depth of the chorus effect.
Balance (Chorus Balance) #
Adjust the volume balance between the direct sound and the
chorus sound. With a setting of "D100: 0W," only the direct
sound will be output. With a setting of "D0: 100W," only the
chorus sound will be output.
Flanger
Pre Delay (Flanger Pre Delay Time)
Adjust the time delay from when the direct sound begins
until the flanger sound is heard.
Rate (Flanger Rate)
Adjust the modulation speed of the flanger effect.
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
63