Tone Settings - Roland RD-600 Owner's Manual

Tone settings
You can modify not only the Tone settings of the 128 internal Tones, but also of the Tones of an
external MIDI device assigned to the TX part.
* For some external MIDI devices it will not be possible to modify their Tone settings. For details refer
to the owner's manual for the external MIDI device that is connected.
MIDI device
Tone 1
External
Tone 2
Procedure
PART SELECT
EDIT LOWER IM UPPER LOWER -MES— UPPER A eeer Urs B
Lae ass a aa ee) Git} Rael
DEMO'
| INTERNAL TONE CATEGORY
PIANO 1 PIANO 2 E.PIANO ORGAN STRINGS PAD BASS/LEAD CLAV/MALLET
Sale esieaies
6 7 8
8B
—<@ PAGE »
C3}
DEC/NO INC/YES
1 2
INTERNAL TONE VARIATION
1 2 4 5 6 7 Sea wewew ee
a a ee ee acre
1. Press the [EDIT]. The indicator will light, and you will enter Edit mode.
2. Use the PAGE [ < ][ > ] buttons to select the parameter that you wish to modify.
Select a parameter prefixed by a "T" character. The setting value and the Tone name are dis-
played below the parameter name.
* By holding down the PAGE [ = ] ([ « ]) button and pressing the PAGE [ «] ([ = ]) button, you can
move rapidly in the | = ] ([ ~« ]) direction.
Parameter Parameter
Setting group TPs e Setting group TFs ip
name
St.Concert ib 8 memerTs Ll o* @
Group/Category/Variation
(for an INT part)
(for a TX part)
3.Select the Part that you wish to modify.
Press one of the part select buttons and the indicator will light, and the name of the currently-
assigned Tone will appear. If you have selected one of the TX parts, the Group/ Category / Variation
will be displayed.
31