Midi Implementation - Roland XV-5080. Owner's Manual

MIDI Implementation

Model XV-5080
Date May. 20, 2000
Version 1.00
1. Receive data
Channel Voice Messages
* Not received in Performance mode when the Receive Switch parameter (PERFORM/
PART) is OFF.
Note off
Status 2nd byte
8nH kkH
9nH kkH
n = MIDI channel number:0H - FH (Ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = note off velocity:00H - 7FH (0 - 127)
* Not received when the Envelope Mode parameter (PATCH/TONE and RHYTHM/
TONE) is NO-SUS.
Note on
Status 2nd byte
9nH kkH
n = MIDI channel number:0H - FH (Ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = note on velocity:01H - 7FH (1 - 127)
Polyphonic Key Pressure
Status 2nd byte
AnHkkH vvH
n = MIDI channel number:0H - FH (Ch.1 - 16)
kk = note number: 00H - 7FH (0 - 127)
vv = Polyphonic Key Pressure:00H - 7FH (0 - 127)
* Not received in Performance mode when the Receive Polyphonic Key Pressure
parameter (PERFORM/MIDI) is OFF.
Control Change
* If the corresponding Controller number is selected for the Patch Control Source 1, 2, 3 or
4 parameter (PATCH COMMON), the corresponding effect will occur.
* If a Controller number that corresponds to the System Control Source 1, 2, 3 or 4
parameter (SYSTEM/COMMON) is selected, the specified effect will apply if Patch
Control Source 1, 2, 3 or 4 parameter (PATCH/COMMON) is set to SYS-CTRL1, CTRL-2,
CTRL-3 or CTRL-4.
Bank Select (Controller number 0, 32)
Status 2nd byte
BnH 00H
BnH 20H
n = MIDI channel number:0H - FH (Ch.1 - 16)
mm, ll = Bank nunber:00 00H - 7F 7FH (bank.1 - bank.16384)
* Not received in Performance mode when the Receive Bank Select (PERFORM/MIDI) is
OFF.
* The Performances, Rhythms, and Patches corresponding to each Bank Select are as
follows.
* The SRX series corresponding to each Bank Select are to see the SRX series owner's
manual.
BANK SELECT | PROGRAM | GROUP
MSB | LSB | NUMBER |
-----+-----------+-----------+----------------------+-----------
000 | | 001 - 128 | GM Patch
: | | |
032 | | 001 - 128 | GM Patch
085 | 000 | 001 - 064 | User Performance
| 032 | 001 - 064 | Card Performance A
| 033 | 001 - 064 | Card Performance B
| : | |
| 064 | 001 - 032 | Preset Performance A | 001 - 032
| 065 | 001 - 032 | Preset Performance B | 001 - 032
| : | |
086 | 000 | 001 - 004 | User Rhythm
| 032 | 001 - 004 | Card Rhythm A
| 033 | 001 - 004 | Card Rhythm B
| : | |
| 064 | 001 - 002 | Preset Rhythm A
| 065 | 001 - 002 | Preset Rhythm B
| : | |
282
3rd byte
vvH
00H
3rd byte
vvH
3rd byte
3rd byte
mmH
llH
| NUMBER
|
|
|
|
| 001 - 064
| 001 - 064
| 001 - 064
: |
: |
| 001 - 004
| 001 - 004
| 001 - 004
: |
| 001 - 002
| 001 - 002
: |
087 | 000 | 001 - 128 | User Patch
| 032 | 001 - 128 | Card Patch A
| 033 | 001 - 128 | Card Patch B
| : | |
| 064 | 001 - 128 | Preset Patch A
| 065 | 001 - 128 | Preset Patch B
| : | |
088 | 000 - 001 | 001 - 128 | SR-JV80-01 Rhythm
| 002 - 003 | 001 - 128 | SR-JV80-02 Rhythm
| : | |
089 | 000 - 001 | 001 - 128 | SR-JV80-01 Patch
| 002 - 003 | 001 - 128 | SR-JV80-02 Patch
| : | |
092 | 000 - | 001 - | SRX Rhythm
| : | |
093 | 000 - | 001 - | SRX Patch
| : | |
120 | | 001 - 057 | GM Rhythm
121 | 000 - 009 | 001 - 128 | GM Patch
Modulation (Controller number 1)
Status 2nd byte
BnH 01H
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Modulation depth:00H - 7FH (0 - 127)
* Not received in Performance mode when the Receive Modulation (PERFORM/MIDI) is
OFF.
Breath type (Controller number 2)
Status 2nd byte
BnH 02H
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
Foot type (Controller number 4)
Status 2nd byte
BnH 04H
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Control value: 00H - 7FH (0 - 127)
Portamento Time (Controller number 5)
Status 2nd byte
BnH 05H
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Portamento Time:00H - 7FH (0 - 127)
* In Performance mode the Part Portamento Time parameter (PERFORM/PART) will
change.
Data Entry (Controller number 6, 38)
Status 2nd byte
BnH 06H
BnH 26H
n = MIDI channel number: 0H - FH (Ch.1 - 16)
mm, ll = the value of the parameter specified by RPN/NRPN
mm = MSB, ll = LSB
Volume (Controller number 7)
Status 2nd byte
BnH 07H
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Volume: 00H - 7FH (0 - 127)
* Not received in Performance mode when the Receive Volume parameter (PERFORM/
MIDI) is OFF.
* In Performance mode the Part Level parameter (PERFORM/PART) will change.
Balance (Controller number 8)
Status 2nd byte
BnH 08H
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Balance: 00H - 7FH (0 - 127)
Panpot (Controller number 10)
Status 2nd byte
BnH 0AH
n = MIDI channel number:0H - FH (Ch.1 - 16)
vv = Panpot: 00H - 40H - 7FH (Left - Center - Right),
* Not received in Performance mode when the Receive Pan parameter (PERFORM/MIDI)
is OFF.
| 001 - 128
| 001 - 128
| 001 - 128
: |
| 001 - 128
| 001 - 128
: |
| 001 - 256
| 001 - 256
: |
| 001 - 256
| 001 - 256
: |
| 001 -
: |
| 001 -
: |
| 001 - 009
| 001 - 256
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
mmH
llH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH