Copying Settings From Some Other Rhythm Tone - Roland XV-5080. Owner's Manual

Chapter 6 Creating Rhythm Sets
Copying Settings from Some
Other Rhythm Tone
The Rhythm Tone settings in a Rhythm Set you select can be
copied to the current Rhythm tone. This can save you a great
deal of time and effort when editing sounds.
1. Confirm that the copy-destination Rhythm Tone is
currently selected.
2. Press [SYSTEM/UTILITY], getting its indicator to start
blinking.
* If the indicator is steadily lit, you are in SYSTEM mode. Press
[SYSTEM/UTILITY] once again, so the indicator is blinking.
3. Press [F6 (Menu)] to select Menu 1.
4. Press [F2 (Copy)].
5. Press [
]/[ ]/[
"Type."
6. Turn the VALUE dial to select "Key."
7. Press [
]/[ ]/[
the parameter you want to set.
8. Either by rotating the VALUE dial or by pressing [INC]/
[DEC], set the value.
9. Press [F6 (Copy)] to initiate the copy.
* Press TONE SELECT [1] - [4] in the Key Selection parameter
to select the percussion instrument (key) you want to set.
TONE SELECT [1]: Selects the key one octave below the
currently selected key.
TONE SELECT [2]: Selects the key a semitone below the
currently selected key.
TONE SELECT [3]: Selects the key a semitone above the
currently selected key.
TONE SELECT [4]: Selects the key one octave above the
currently selected key.
* You can also press a key on a connected MIDI keyboard to
select the percussion instrument sound (key). (p. 168)
Patch Name Copy
You can copy the Patch name by setting the value to
"NAME" in Step 6 above.
180
]/[ ] to move the cursor to
]/[ ] to move the cursor to
Compare Function
You can use the Compare function during the Rhythm
Key Copy operation.
The Compare function allows you to play the Rhythm
Tone currently occupying the copy source. To do so,
press [F1 (Compare)] to access the Rhythm Compare
page. The new Rhythm Tone can also be selected from
the Rhythm Compare page. However, it is not possible
to select patches from XP-A through F. After selecting a
rhythm tone, press [F1] again to return to the previous
page.
* The Compare function cannot be used if a Rhythm Tone
of the temporary area (Temporary Patch) is selected as the
copy-source Rhythm Tone.
* Please be aware that when the Compare function plays a
Rhythm Tone, it may sound slightly different than when
it is played normally.