Auto Load - Roland XV-5080. Owner's Manual

Auto Load

This selects the folder (<Sample>) to which samples are
automatically loaded when the XV-5080's power is turned
on.
* If you select Auto Load, the display will show a message for
ten seconds, informing you that "Samples for automatic
loading were found. Execute automatic loading?" If you wish
to load the samples, press [F6 (Yes)]. If you do not wish to
load, press [EXIT]. If you do nothing while the message is
displayed (ten seconds), the samples will be loaded
automatically.
1. Press [DISK], getting the indicator to light.
2. Press [F4 (Auto Ld)].
3. Press [F1 (Drive)].
The Drive window will appear.
The SCSI ID and Volume Label of the connected SCSI device
appear in the window.
4. Turn the VALUE dial to select the SCSI ID for the drive
you want to load.
5. Press [F6 (OK)].
By pressing [F2 (View)], you can specify the category of files
to be displayed.
Turn the VALUE dial or press [
category to be loaded, then press [F5 (On/Off)]. Press [F4
(All) if you want to set markers for all files. Press this once
more to remove all markers. And then press [F6 (OK)] to
finalize the category.
* The category designations are displayed in the upper right of
the screen with the View function. When categories are
specified, "View(Filterd)" appears. If no category is specified,
"View(All)" appears.
The files can also be sorted. Press [F3 (Sort)] to open the
window for selecting the sorting preferences. Turn the
VALUE dial or press [ ] or [
then press [F6 (OK)].
Without: Files are displayed in the order in which they have
been saved.
Name: Files are sorted by file name, in ascending order.
Size : Files are sorted in ascending order of file size.
Size : Files are sorted in descending order of file size.
] or [ ] to select the
] to select the sort type,
Chapter 7 Loading a Variety of Data
6. Display the sample you want to load, then press [F6
(SELECT)].
* If you want to delete the settings, press [F5 (OFF)].
The path name showing the media used for the Auto Load
appears below Auto Load Path.
fig.07-03.e
7. Press [DISK] to return to the previous page.
Free Area
SIMM
This displays the amount of free space in the SIMM.
Disk
This displays the free disk space remaining on the connected
SCSI device.
Total
SIMM
This shows the total memory of the installed SIMM.
Target
This shows the total size of all samples in the selected Sample
folder.
189