Error Message - Konica Minolta CA-410 Series Instruction Manual

Error message

The operation is not correct. Follow the instructions displayed immediately.
Message
--failed to write or read on memory
--reconnect the probe
--System error
--restart and application and a device
--SDK has problem
--restart SDK
Unknown error.
Cannot calibrate selected channel.
Cannot set target on
selected channel.
A memory error has occurred inside the probe. If this condition persists after
reconnecting, contact a service center to deal with the possible malfunction.
A program operation error has occurred inside the probe or SDK. If this
condition persists after restarting, contact a service center to deal with the
possible malfunction.
A program operation error has occurred inside the SDK. If this condition
persists after restarting, contact a service center to deal with the possible
malfunction.
An unknown error code has been returned from the SDK. Due to the
possibility of having an incompatible version, re-installation is
recommended.
The selected channel cannot be calibrated. If the channel in question is not
CH00, that channel may be locked. Contact a service center.
Target cannot be set for the selected channel. The channel may be locked.
Contact a service center.
70
Details