Page 2
CRT COLOR ANALYZER CA-100Plus Application Chromaticity Adjustment, Inspection White-balance Adjustment, Inspection Cut-off Adjustment, Inspection Select the probe among the following four types. Measuring Probe (Cable length: 2 m) Measuring Probe (Cable length: 5 m) High luminance Measuring Probe (Cable length: 2 m) High luminance Measuring Probe (Cable length: 5 m) ∗Up to five probes can be connected to a single main body.
Page 3
Pattern Generator made with SDK and B). Since the matrix correction factor obtained from Minolta's calibration standard has been set, measured values calculated based on this factor will be acquired when this instrument is used for the first time since shipment from the factory.
Page 4
Mainbody, Probe 3.58 kg, 285 g *1 The chromaticity and luminance are measured under Konica Minolta’s condition (standard CRT (6500 K) is used). *2 The luminance for monochrome is measured when the reading of luminance for white is 40.00 cd/m...