User calibration
3. Specifying the calibration coefficients <Settings> window
To perform measurement using your own correction coefficients, specify which calibration channel's correction coefficients
you want to use. Specify [CH00] to perform measurement without performing correction but in accordance with the Konica
Minolta standard.
3-1. Selecting a calibrated channel
(1)
Click [Settings] to bring up the following pop-up window for setting the measurement conditions and optional items.
(2)
In the [CH ID:] field under [Memory Info.] in the [Setting] tab, select a calibrated calibration channel.
The target saved to the calibration channel is displayed in the pane below for your review.
(3)
Click [OK] to confirm the calibration channel for which the correction coefficients are to be used. The pop-up closes.
Click [Cancel] to close the pop-up without confirming the calibration channel.
64