Konica Minolta CA-410 Series Instruction Manual page 79

List display color
Blue 6: Δ t out of range
Blue 7: Δ t out of range
Yellow 10:Problem with
CA-410 device
Yellow 20:Out of EXT range External synchronization signal is invalid. (External synchronization signal is
Yellow 50:FMA value over
999.9%
Yellow 51:Out of EXT range
for FMA
Yellow 53:Not flicker probe CA-VP 410 or CA-VP 427 is connected in flicker mode.
White 64:Low Battery
Blue 65:Low Battery +
other errors
Blue 66:Low Battery +
other errors
Blue 67:Low Battery +
other errors
Blue 68:Low Battery +
other errors
Blue 69:Low Battery +
other errors
Blue 70:Low Battery +
other errors
Blue 71:Low Battery +
other errors
* If correlated color temperature or dominant wavelength cannot be calculated, "----" is displayed as measured value.
* If there is a colorimetric value that has not been measured when reading the data of the data processor, its colorimetric
value will be displayed as "-9999", "- 99999999", etc.
Error Code
Error code 2 and error code 4 occurred at the same time.
Error code 1, error code 2, and error code 4 occurred at the same time.
There is a problem with CA-410.
set to less than 0.5 Hz or over 240 Hz.)
The measured value in flicker mode exceeds 999.9%.
Synchronization signal is invalid in FMA flicker mode. (The synchronization
signal is set at less than 0.5 Hz or over 130 Hz.)
Battery level is low.
Error code 1 and error code 64 occurred at the same time.
Error code 2 and error code 64 occurred at the same time.
Error code 1, error code 2, and error code 64 occurred at the same time.
Error code 4 and error code 64 occurred at the same time.
Error code 1, error code 4, and error code 64 occurred at the same time.
Error code 2, error code 4, and error code 64 occurred at the same time.
Error code 1, error code 2, error code 4, and error code 64 occurred at the
same time.
Meaning
77