System Environment; Setup; Installing The Software (Windows); Uninstalling The Software (Windows) - Konica Minolta CA-410 Series Instruction Manual

System environment

Operating requirements

OS
Windows 7 Professional 32bit (with hotfix KB2964073 applied)
Windows 7 Professional 64bit (with hotfix KB2964073 applied)
Windows 10 Pro 32bit
Windows 10 Pro 64bit
macOS Sierra
• Hotfix KB2964073 for Windows 7 can be obtained from the following Microsoft
https://support.microsoft.com/en-us/help/2964073/stop-error-7e-or-stop-error-d1-occurs-during-read-operations-on-a-usbs
• The PC's system configuration must be either that recommended for the above OS or have the following specifications,
whichever is higher.
PC
Computer equipped with Intel Core i series, or equivalent or higher processor
RAM 4 GB or more
Hard disk More than 100 MB of available space
Out of the above, there must be at least 50 MB of available space on the system drive (drive where
the OS is installed)
Display resolution 1280 x 768 or higher, 16-bit color or higher
Other
USB port required to connect the USB flash drive
USB 2.0 or above required to connect the instrument

Instruments controlled

CA-410 data processor: CA-DP40
CA-410 probe: CA-P427 / P427H / P410 / P410H / MP410 / MP410H / VP427 / VP410

Language

Display language English

Setup

1. Installing the software (Windows)

Double-click [setup.exe] on the supplied USB flash drive or in the Windows folder where the file was downloaded. Proceed
as instructed on the screen. When you agree to the license agreement, the installation process starts and the following
folders are created under the [Program Files (x86)] folder. The program and manual are installed, and the CA-S40 startup
menu is registered in the Start menu.
[Program Files (x86)] – [KONICA MINOLTA] – [CA-S40]

2. Uninstalling the software (Windows)

Open [Control Panel] - [Uninstall a program], select CA-S40 from the list, and double-click it or click [Uninstall].

3. Installing the software (macOS)

Double-click [setup.pkg] on the supplied USB flash drive or in the Mac folder where the file was downloaded. Proceed as
instructed on the screen. When you agree to the license agreement, the installation process starts and the following folders
are created under the [Application] folder. The program and manual are installed, and the CA-S40 startup menu is registered
in the Launchpad.
[Application] – [KONICA MINOLTA] – [CA-S40]

4. Uninstalling the software (macOS)

Right-click the CA-S40 application and click [Move to Trash].
® website:
40