Cable Crossover 4000; Cable Tower 4000 - ERGO-FIT Power Line 4000 Owner's Manual

POWER LINE 4000
5.4.8.2

CABLE CROSSOVER 4000

5.4.8.3

CABLE TOWER 4000

Bring the machine to the desired place and adjust the same. Then attach the rubber pads to the base plates (5) and
fix the seat and the seat bench by the clamp collar on the frame. Turn the feet down until the machine has a stable
position on the floor. Then tighten the clamp collars at the seat and the seat bench. Finally, test again the feet for a
stable position and readjust the same if necessary.
8
7
6
Technical and optical modifications as well as misprints reserved
3
1
2
1
2
4
3
5
1 Steel cable
(weight transmission)
2 Dowel pin
(locked)
Snap-on weights
3 Handlebars
1 Steel cable + Flat belt
(weight transmission)
2 Dowel pin
(locked)
Snap-on weights
3 Rowingstation
4 Seat pad
5 Base plates
6 Seat pad
7 Thigh restraint
8 Lat pulldown
© 2013 by ERGO-FIT GmbH & Co. KG
-
(5kg each)
(5kg each)
3 3