Operational Safety – What Needs To Be Done - ERGO-FIT Power Line 4000 Owner's Manual

injury.
⊗ Please pay attention to the correct use of the triceps rope. Always clasp the rope
with both hands. Never hold and tear at only one end of the rope due to risk of
injury.
⊗ Carefully lower the weights during the workout. They must not be thrown since
any impact may damage the weights.
⊗ During the training do not touch the USB port, the RS232 port or the audio
port.
⊗ Please review the additional safety and operational notices in this manual.
All safety instructions in this manual are based on many years of experience and
selfconception.
2.2 Operational safety – what needs to be done
⊗ After delivery, make sure that the machine has not been damaged during
transport. In case of doubt, do not start the machine and contact the customer
service.
⊗ Regularly check the cable, wires, steel cable and cable clamp for damage.
⊗ Do not place beverages on your training machine. Instead, use the bottle holder
which is specially designed for beverages.
⊗ Set up the training machine so that there is sufficient open space around it. This
reduces risks to the trainee as well as other people around.
2.3 Choosing the right place of installation
⊗ The machine can be set up on any level and stable floor. Make sure that it
stands firmly on the floor.
⊗ Never put wood, cardboard or similar materials underneath the machine to
compensate surface unevennesses. This increases the risk of an accident.
2.4 What needs to be considered in case of repair
⊗ Electric parts must be replaced with original equipment only.
⊗ Repairs must be carried out by a qualified technician only. If you do not have the
necessary qualifications, ask the ERGO-FIT Service Center
8
Technical and optical modifications as well as misprints reserved
Safety information
© 2013 by ERGO-FIT GmbH & Co. KG
-