Related Manuals for ERGO-FIT CARDIO LINE 4000
Summary of Contents for ERGO-FIT CARDIO LINE 4000
- Page 1 Owner‘s manual CAR- CARDIO LINE 4000 CARDIO LINE 4000 CARDIO LINE 4000 Please read this manual carefully before use and keep it in a safe place for future reference...
- Page 3 ERGOFIT GmbH & Co. KG. Trade marks: ERGO-FIT and the ERGO-FIT Logo are registered trade marks of ERGO-FIT GmbH & Co. KG. POLAR is a registered trade mark of POLAR Electro GmbH. All other trademarks used/shown in this text are trademarks of their respective owners and are thus protected.
- Page 4 Dear customer, Thank you for purchasing an ERGO-FIT training device. You are now the owner of a state- of-the-art training system that combines highest technical standards with easy-to-use functionality. This user manual provides information on several models. This means that you may find explanations that do not directly apply to your training device.
-
Page 5: Table Of Contents
Maintenance ....................Troubleshooting ................... Appendix ...................... 103 Please note: This user manual provides information on several devices. Details may vary depending on your model! Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 7: General Information
Parts Included in the Delivery ............... Customer Service ..................Disposal ......................Please note: This user manual provides information on several devices. Details may vary depending on your model! © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 8 General Information ERGO-FIT Cardio Equipment at a Glance ERGO-FIT CARDIO LINE 4000 machines are intended to provide a cardiovascular workout while simultaneously exercising small (e.g. CIRCLE) and large (e.g. CROSS) muscle groups. ERGO-FIT cardio machines offer you best training possibilities, regardless of your age, gender or fitness level.
- Page 9 CARDIO LINE 4100 S/S MED/MED General Information on this Manual Whether you are already familiar with ERGO-FIT workout equipment or whether you have not used our machines yet: This manual gives you important information. You can easily find the information you are looking for by searching the table of contents. Users who are already familiar with ERGO-FIT equipment might find the Quick Reference helpful.
- Page 10 (EAR) Benno-Strauß-Straße 1 D-90763 Fürth Phone: +49 (911) 766650 Fax: +49 (911) 7666599 Mail: info@stiftung-ear.de Web: www.stiftung-ear.de © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 11: Safety Instructions
Things to be Avoided ..................11 Contraindications ..................12 Please note: This user manual provides information on several devices. Details may vary depending on your model! Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 12: What You Need To Know When Using Your Workout Equipment
For safety reasons inspect the power cord for signs of damage before each use. If the machine is damaged do not use it until it is repaired. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 13 All safety instructions in this manual are based on many years of experience and selfconception. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 14 Chapter 9.1 for a more detailed description. ⊗ Tighten the seat and handlebar clamp after adjusting the seat and handlebar. Otherwise there is a risk of injury. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 15 Note: Keep away from the dangerous pull in area at the rear end of the treadmill! Keep away long hair, loose clothes, jewelry, shoestrings towels etc. from this area. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 16: Instructions For Safe Operation
For 4000/4100 MED, 4000/4100 S MED the protection guidelines according to EN 60601-1-1:2006 apply. ⊗ If you connect additional devices to the CARDIO LINE 4000 line you are committed to comply to the system standard EN 60601-1-1.. How To Avoid Electrical Shocks ⊗... -
Page 17: Choosing The Right Place Of Installation
Things to be Avoided ⊗ Only use the machine for the purposes it was intended for. If you use the ERGO-FIT machine for other than the intended purpose, you will be charged for all damages resulting from this. In this case any warranty is void! ⊗... -
Page 18: Contraindications
⊗ acute ulmonary embolism acute carditis (Myo-, Endo-, Pericarditis) ⊗ ⊗ acute phlebothrombosis of the upper extremeties ⊗ acute aortic dissection © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 19: Technical And Visual Modifications As Well As Misprints Reserved
⊗ hypertrophic-obstructive cardiomyopathy and other forms of outflow tract obstruction ⊗ advanced AV-blockages ⊗ anemia ⊗ physical and/or mental health problems ⊗ arrhythmias © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 20: Technical And Visual Modifications As Well As Misprints Reserved
Safety instructiones © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 21: Quick Reference
CARDIO LINE 4100 S/S MED/MED Chapter 3 Quick Reference Please note: This user manual provides information on several devices. Details may vary depending on your model! Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 22: Technical And Visual Modifications As Well As Misprints Reserved
For workouts in Profile, Cardio-/System or Test mode, please read the detailed instructions. Tests can be performed on CYCLE and TRAC machines only. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 23: Intended Use
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED Chapter 4 Intended Use Product Lines ....................4.1.1 CARDIO LINE 4000/4100, 4000/4100 S, 4000 S SP, 4000 SP ....4.1.2 CARDIO LINE 4000/4100 MED, 4000/4100 S MED ........Models ......................4.2.1 CIRCLE ......................18 4.2.2... -
Page 24: Technical And Visual Modifications As Well As Misprints Reserved
Intended Use Intended Use Product Lines The following ERGO-FIT cutting-edge product lines have been designed to meet highest expectations. 4.1.1 CARDIO LINE 4000/4100, 4000/4100 S, 4000 S SP, 4000 SP This product line offers stationary equipment for cardio-vascular workout. They are spe- cially designed for use in professional facilities. -
Page 25: Technical And Visual Modifications As Well As Misprints Reserved
4.2.7 TRAC TRAC is a treadmill for walking or running. The workout intensity can be modified in order to achieve optimum cardio-vascular results. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 26: Technical And Visual Modifications As Well As Misprints Reserved
Intended Use © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 27: Transport And Installation
STAIR ......................31 5.5.7 TRAC ......................31 Please note: This user manual provides information on several devices. Details may vary depending on your model! Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 28: Transport
ERGO-FIT GmbH & Co. KG. If ERGOFIT machines are delivered by a freight forwarder, the customer must dispose the packaging himself or may send it back to ERGO-FIT GmbH & Co. KG. (transportation costs are on behalf of the customer). The machines do not have any shipping locks! 5.1.1... -
Page 29: Cycle
If this is not the case, make sure you followed the steps above correctly. In addition, verify if the socket is live. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 30: Recumbent
5.1.7 TRaC Machine installation and setup should always be performed directly by ERGO-FIT or by an authorized service technician. This guarantees for a safe and proper operation. Inspect the running belt after setup or relocation and adjust it if necessary (see maintenance guidelines in chapter 9.1.7). -
Page 31: Setup Location And Installation
Temperature ⊗ Your ERGO-FIT exercise machine may be used at an ambient temperature of +10°C to +40°C, a relative humidity of 30 to 75% (non-condensing) and an atmospheric pressure of 700 hPa to 1060 hPa without causing any problem. -
Page 32: Power Supply
(e.g. K-automat). In case of doubt, ask your electrician. Before connecting your ERGO-FIT exercise machine to your power supply system, com- pare the acceptable voltage and frequency on the name plate (next to power entry module) with your local data. -
Page 33: Cabeling
(at least 1x24 hours per week) by a special charging power supply unit, which is available with ERGO-FIT, is indispensable. If the buffer time reduces and can no longer be kept up by charging the batteries should be replaced. Due to the self-discharge rate of the batteries during operation at room temperature they should be changed every 2 years. -
Page 34: Components
4 Foldable seat 5 End stop 6 Leveling feet (on both sides of the oval tubes) 7 Power entry module 8 Control panel © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 35: Cross
4 Vertical seat adjustment 5 Power entry module 6 Leveling feet (on both sides of the oval tubes) 7 Pedals 8 Control panel 9 Bottle holder © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 36: Mix
5 Pedals 6 Power entry module 7 Display 8 Bottle holder © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 37: Stair
4 Power entry module with retaining clip 5 Key switch 6 Automatic circuit breaker 7 Control panel 8 Bottle holder 9 Bar (optional contact heart rate electrodes) © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 38: Technical And Visual Modifications As Well As Misprints Reserved
Transport and Installation © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 39: Setup
The Buttons ....................6.4.2 The Display ....................46 Please note: This user manual provides information on several devices. Details may vary depending on your model! Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 40: Switching On
The Right Workout Technique The heart rate controlled workout based on the ERGO-FIT point system makes sure that you exercise with optimum intensity. However, you should also take into account biomechanical considerations when exercising. This section provides information on relevant aspects for every cardio exercise machine. -
Page 41: Circle
For workout in sitting position sit down straight with your knees bent at 90 degrees. Grasp the handles at the ball Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 42: Technical And Visual Modifications As Well As Misprints Reserved
(pushing and pulling). In standing position make sure that you stand with feet shoulder width apart. Stand on the platform. Maintain the workout position described here during the whole workout. Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 43: Cross
If the heart rate is too high the resistance will be decreased. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 44: Cycle
Now bring the seat into the desired position. Then push the lever back to its original position to lock the seat. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 45: Mix
7 minutes. If the lifting motor overheats, it might get stuck and the lifting feature will fail. In this case allow the motor to cool down. Its function will usually recover. Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 46: Recumbent
(also see CYCLE). To lock the seat in the desired sitting position, release the adjustment lever to bring it back to its initial position. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 47: Stair
The arms should swing synchronously to the stepping movement. Always keep your upper body upright during exercise (do not arch your spine) and never extend your legs completely. Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 48: Trac
MINUS (see chapter 6.4.1). It is important that you maintain your individual running speed. Avoid repeated variations of your running speed. Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 49: The Control Panel
The Control Panel ERGO-FIT exercise equipment is known for its outstanding ease of use. 4000/4100 S/S SP/ MED/S MED machines for example are equipped with a user guidance system that is simple and easy to understand. -
Page 50: Technical And Visual Modifications As Well As Misprints Reserved
Setup CARDIO LINE 4000 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 51: Technical And Visual Modifications As Well As Misprints Reserved
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED CARDIO LINE 4100 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 52: The Buttons
RECUMBENT KCAL Calories burnt (average) kcal STAIR TIME Workout time 00:00 (min:sek) PULSE Current heart rate per minute 1/min (only with POLAR transmitter) © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 53: Technical And Visual Modifications As Well As Misprints Reserved
TRAC KCAL Calories burnt (average) kcal TIME Workout time 00:00 (min:sek) PULSE Current heart rate per minute 1/min (only with POLAR transmitter) Incline © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 54: Technical And Visual Modifications As Well As Misprints Reserved
Setup © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 55: Operation
Contact Heart Rate ..................79 7.5.3 Potential Interferences .................. Please note: This user manual provides information on several devices. Details may vary depending on your model! Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 56: Operation Modes
When you power on the device the first thing you see is the main menu with the following options: ⊗ MANUAL ⊗ PROFILES ⊗ CARDIO (CARDIO LINE 4000 S/S MED/S SP only) ⊗ MANUAL CD (MANUELL COUNTDOWN) ⊗ GEARSHIFT (CYCLE und RECUMBENT only) ⊗ TEST (TRAC series 4000 S, 4000 S MED only, CYCLE dependent on the test-mode) To return to the main menu press the STOP button once or several times. -
Page 57: Profiles
TRAC 0,2-25 km/h 0,1 km/h 0,2-25 km/h Instead of showing the default speed setting (1/min) the CROSS display indicates the current pedaling frequency (actual value) CARDIO LINE 4000 SP, 4000 S SP Machine type Power range Increments Speed CROSS 15-200 workload levels... -
Page 58: Technical And Visual Modifications As Well As Misprints Reserved
Profile 3: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Profile sections © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 59: Technical And Visual Modifications As Well As Misprints Reserved
The default workout time is 60 minutes. For the profile sections you can choose between 10 to 60 minutes (default time 20 minutes) by pressing PLUS/MINUS. Confirm your selection by pressing START. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 60: Cardio
It is recommended to use a wireless chest belt for the CARDIO and TEST workout programs. Contact heart rate values are for information only. In order to determine the maximum and minimum heart rate values you have to perform an ERGO-FIT cardio test (CYCLE 4000 S, 4000 S SP, or 4000 S MED). -
Page 61: Technical And Visual Modifications As Well As Misprints Reserved
5 to 60 minutes (default time: 20 minutes). Confirm with START. Now set the maximum heart rate. Change the default value by pressing PLUS or © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 62: Technical And Visual Modifications As Well As Misprints Reserved
The display now shows the CARDIO mode. Your current heart rate is determined. This may take a few seconds. As soon as your heart rate has been determined training starts with the initial workload. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 63: Manual Countdown
START. The PARAMETER submenu is displayed. Enter your body weight by pressing PLUS/MINUS (default weight: 70 kg). Confirm your selection with START. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 64: Test
STOP button - in this case test analysis is not possible. After the test the test results remain on the display. By pressing STOP again you return to the main menu. Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 65: Technical And Visual Modifications As Well As Misprints Reserved
Test procedure with chip card: ⊗ PWC 130/150/170 (sub maximum test with a heart rate of 130/150/170, only CYCLE 4000 Model „S“ in combination with an ERGO-FIT training software ⊗ SLevel test (sub maximum test with a heart rate of 130/150/170), only TRAC 4000 Model „S“... -
Page 66: Cardio Line 4100
0 to 60 minutes (default time: 20 minutes). You can increase / decrease the workout time by pressing PLUS and MINUS, or you can manually © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 67: Manual Gearshift
It is recommended to use a wireless chest belt for the CARDIO and TEST workout programs. Contact heart rate values are for information only. Perform an ERGO-FIT Cardio test to Technical and visual modifications as well as misprints reserved... -
Page 68: Technical And Visual Modifications As Well As Misprints Reserved
Another advantage of chip card-based workout is that the user does not have to make any other modifications during workout. The ERGO-FIT chip card allows you to perform the ERGO-FIT cardio points training. Workout without chip card: In the main menu press CARDIO. -
Page 69: Technical And Visual Modifications As Well As Misprints Reserved
Now the CARDIO mode is displayed. Your current heart rate is determined. This may take a few seconds. When the heart rate is displayed workout starts with the initial workload. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 70: Technical And Visual Modifications As Well As Misprints Reserved
Press the START button to open the „Cardio parameters“ window. Enter the initial © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 71: Profiles
(Watt, 1/min etc.), the heart rate graph and the performance graph remain on the display. By pressing STOP again you return to the main menu. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 72: Test
After the test is completed you will see the Test Results screen. Here you get a summary of the test results. By pressing STOP again you return to the main menu. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 73: Technical And Visual Modifications As Well As Misprints Reserved
Test procedure with chip card: ⊗ PWC 130/150/170 (sub maximum test with a heart rate 130/150/170), CYCLE 4000 marked „S“ in combination with an ERGO-FIT training software only. ⊗ level test (sub maximum test with a heart rate 130/150/170), TRAC 4000 marked „S“... -
Page 74: Technical And Visual Modifications As Well As Misprints Reserved
At the end of the test you are told on which device you can continue your workout. Press STOP to end your cardio workout and remove your chip card. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 75: Entertainment
When you use the emergency stop feature remember to step on the side foot plates. Read the safety instructions in the appendix. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 76: Functional Test
Heart Rate ⊗ Check the heart rate control (see chapter 7.5). Related Functions ⊗ Move the pedals forward and backwards to check their function. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 77: Cycle
Related Functions ⊗ Make sure that the seat can be adjusted easily. ⊗ Move the pedals forward and backwards to check their function. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 78: Recumbent
⊗ Select MANUAL mode and increase the speed constantly (see Chapter 7.1.1). © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 79: Default Settings
MINUS: You can you can navigate in the menu and decrease settings START: You can confirm your selections or settings STOP: You can cancel a function or leave the menu © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 80: Cardio Line 4000
Select “RS232”. Press PLUS/MINUS to select the protocol (00, 01, 02 etc.) and confirm with START. The protocol selection is stored. Press STOP to return to the main menu. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 81: Cardio Line 4100
For further control additional icons are displayed. Unknown commands are listed as “ / “. Note: Not all ECG devices are compatible to CARDIO LINE 4000/4100. For further information please call +49 6331 2461-0 in Germany. -
Page 82: Technical And Visual Modifications As Well As Misprints Reserved
Setting up the serial number (serial numbers must only be changed by authorized ERGO-FIT service personnel or if instructed to do so by an ERGO-FIT employer): Select the option by touching it. It will be highlighted in blue. Now you can enter the serial number via the numeric panel. -
Page 83: Heart Rate Control
Setting up the Touchscreen: Use the arrow buttons on the right and left side of the scroll bar to select „capacitive“ or „resitive“. Menü „Service“ (this menu should only be operated by an ERGO-FIT service technician): ⊗ Operation time: Here the previous operation time in km and minutes/hours are shown. -
Page 84: Belt And Transmitter
Operation Range of the POLAR Transmitter The operation range of the emitter is approx. 80 cm. If you have more than one ERGO-FIT exercise machine make sure to keep a distance of at least 100 cm between the machines to avoid interference of the transmitters. -
Page 85: Contact Heart Rate
If the heart rate is displayed irregularly despite faultless technical conditions, check your heart rate manually. In case of doubt, you should see your doctor. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 86: Technical And Visual Modifications As Well As Misprints Reserved
Operation © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 87: Workout
Weight Reduction – the Benefits ..............Workout Tips ....................83 Please note: This user manual provides information on several devices. Details may vary depending on your model! Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 88: The Effect Of The Workout
It is a fact that regular exercise reduces the risk of heart diseases. In other words, regular workout improves the oxygen supply of the body and reduces the risk of cardiovascular diseases. For this reason, ERGO-FIT cardio workout equipment is used in training facilities and rehabilitation centers. -
Page 89: Workout Routine - Aspects To Be Considered
When exercising on our machines your heart rate should not exceed a certain maximum value. Optimum aerobic workout is only possible below this limit. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 90: Technical And Visual Modifications As Well As Misprints Reserved
Workout © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 91: Maintenance
9.1.7 TRAC ......................Cleaning ......................93 Please note: This user manual provides information on several devices. Details may vary depending on your model! Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 92: Maintenance And Care
⊗ cables, connectors or casing are damaged, ⊗ covers have dropped off. Maintenance of the machine may be carried out by the ERGO-FIT customer service. We also offer maintenance contracts. Maintenance and Care ERGO-FIT machines are low-maintenance products. The following chapters outline important inspections and maintenance procedures for different models. -
Page 93: Cross
14 mm socket spanner (1/4 inch). The pedal may be retightened to the crankshaft with a 15 mm open-end spanner. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 94: Stair
Do not apply oil or grease to the external parts of the machine. 9.1.7 TRAC ERGO-FIT recommends servicing the TRAC every two years or after 30.0000 km. Adjusting the Running Belt The rear drive shaft is a dangerous area because here the running belt is drawn into the machine. -
Page 95: Technical And Visual Modifications As Well As Misprints Reserved
(see section 1.). Make sure that the running belt stays between the two arrows on the back part of the treadmill frame. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 96: Technical And Visual Modifications As Well As Misprints Reserved
Use the provided special oil and a 10ml-syringe. Only use the provided special oil (special oil is available on demand at ERGO-FIT)! Other oils or lubricants may damage the running belt and bearing surface and the treadmill might get damaged. Two syringes of 10 ml special oil are needed for every maintenance procedure. -
Page 97: Technical And Visual Modifications As Well As Misprints Reserved
Setzen Sie die Anzeige wieder zurück wie in Kapitel 7.4.1 Grundeinstellungen CARDIO LINE 4000, Auswahl der Ölintervalle im Servicemenü bzw. 7.4.2 Grundein- stellungen CARDIO LINE 4000, Menü „Service“, Einstellen des Serviceintervalls... -
Page 98: Technical And Visual Modifications As Well As Misprints Reserved
1 mm Adjusting the photo sensor Make sure that the virtual extension of the photo sensor continues through the centre of the motor shaft. © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 99: Cleaning
During training with chip card regularly clean the chip cards and chip-card readers with a cloth and isopropanol. Special cleaning sets are also available with ERGO-FIT. Technical and visual modifications as well as misprints reserved... -
Page 100: Technical And Visual Modifications As Well As Misprints Reserved
Maintenance © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 101: Troubleshooting
Finding the Error ..................96 10.2 Error Messages ................... 97 Please note: This user manual provides information on several devices. Details may vary depending on your model! Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 102: Technical And Visual Modifications As Well As Misprints Reserved
Troubleshooting Troubleshooting Despite the high quality of ERGO-FIT products malfunctions may occur. In this chapter you find troubleshooting information. If you suspect a technical malfunction do not operate the machine. If you can repair the machine yourself nevertheless inform us of the malfunction. -
Page 103: Technical And Visual Modifications As Well As Misprints Reserved
If the card reader works fine with a different card, the data is probably damaged. Use the appropriate ERGO-FIT software to rewrite the data on the card. -
Page 104: Technical And Visual Modifications As Well As Misprints Reserved
You cannot carry out an ERGO-FIT test using a training card. Solution: If you need a new test evaluation, please initialize the chip card for a test using the ERGO-FIT software and then use this chip card for the test. NO ID 55 Problem: There is no data on the chip card - the chip card has possibly never been used, or the chip itself is damaged. -
Page 105: Technical And Visual Modifications As Well As Misprints Reserved
If unsuccessful, check if the card reader is malfunctioning by inserting another chip card. If the error persists please contact the ERGO-FIT service center. If the card reader works fine with a different card, the data is probably damaged. Use the appropriate ERGO-FIT software to rewrite the data on the card). -
Page 106: Technical And Visual Modifications As Well As Misprints Reserved
Problem: The machine is not listed on the workout schedule. Solution: Enter the device in the workout schedule by using the ERGO-FIT software. Unable to connect with Cardea Server Problem: The system cannot connect with the Cardea Server. Training with the card reader configuration mode „RFID only“... -
Page 107: Technical And Visual Modifications As Well As Misprints Reserved
A profile has been created without any levels. Solution: End the training and switch off the machine (keep it off for at least 10 min). 1 0 1 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 108: Technical And Visual Modifications As Well As Misprints Reserved
Troubleshooting 1 0 2 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 109 Safety Instructions ..................135 Please note: This user manual provides information on several devices. Details may vary depending on your model! 1 0 3 Technical and visual modifications as well as misprints reserved © 2018 by ERGO-FIT GmbH & Co. KG...
-
Page 110: A Appendix
Technical Specification CARDIO LINE 4000/4100 S/MED/S MED This chapter lists the technical specifications of your cardio machine. The tables contain information for CARDIO LINE 4000/4100, 4000/4100 S, 4000/4100 MED, and 4000/4100 S MED. 1 0 4 © 2018 by ERGO-FIT GmbH & Co. KG... -
Page 111: Technical And Visual Modifications As Well As Misprints Reserved
1 channel with ECG accuracy monitoring Heart rate dependent With POLAR transmitter workload control Activation rpm-independent Max. user weight 200 kg Interface RS 232 1 0 5 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 112: Technical And Visual Modifications As Well As Misprints Reserved
1 channel with ECG accuracy monitoring Heart rate dependent With POLAR transmitter workload control Activation rpm-dependent Max. user weight 200 kg Interface RS 232 1 0 6 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 113: Technical And Visual Modifications As Well As Misprints Reserved
Heart rate dependent With POLAR transmitter workload control Activation rpm-independent, rpm-dependent Max. user weight 180 kg Interface RS 232 1 0 7 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 114: Technical And Visual Modifications As Well As Misprints Reserved
1 channel with ECG accuracy monitoring Heart rate dependent With POLAR transmitter workload control Activation Max. user weight 200 kg Interface RS 232 1 0 8 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 115: Technical Specifications
Heart rate dependent With POLAR transmitter workload control Activation rpm-independent, rpm-dependent Max. user weight 200 kg Interface RS 232 1 0 9 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 116: Technical And Visual Modifications As Well As Misprints Reserved
1 channel with ECG accuracy monitoring Heart rate dependent With POLAR transmitter workload control Activation Max. user weight 200 kg Interface RS 232 11 0 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 117: Technical And Visual Modifications As Well As Misprints Reserved
0% - 20% (ALPIN), -5 % - 15% (TOUR) Noise emission <70 dB (A)* Die Geräuschemission unter Belastung ist höher als ohne Last © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 118: Technical And Visual Modifications As Well As Misprints Reserved
Appendix CARDIO LINE 4000 SP, 4000 S SP This chapter lists the technical specifications of your cardio machine. The tables contain information for CARDIO LINE 4000 SP and 4000 S SP. Description CROSS Supply voltage 48-60 Hz Power input Fuses... -
Page 119: Technical And Visual Modifications As Well As Misprints Reserved
Heart rate dependent With POLAR transmitter workload control Activation rpm-independent, rpm-dependent Max. user weight 180 kg Interface RS 232 optional 11 3 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 120: Technical And Visual Modifications As Well As Misprints Reserved
Heart rate dependent With POLAR transmitter workload control Activation rpm-independent, rpm-dependent Max. user weight 200 kg Interface RS 232 optional 11 4 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 121: Technical And Visual Modifications As Well As Misprints Reserved
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED Electromagnetic Emission and Interference Immunity Electromagnetic Emission ERGO-FIT products are intended for use in the following environments. Please make sure to only use the product in appropriate environments. Emission Conformity... -
Page 122: Technical And Visual Modifications As Well As Misprints Reserved
Appendix Electromagnetic Interference Immunity CARDIO LINE 4000/4100 S/MED/S MED ERGO-FIT products are intended for use in the following environments. Please make sure to only use the product in appropriate environments. Interference immunity IEC 60601- Conformity Electromagnetic test test level environment... -
Page 123: Technical And Visual Modifications As Well As Misprints Reserved
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED Electromagnetic Interferrence Immunity CARDIO LINE 4000 SP, 4000 S SP ERGO-FIT products are intended for use in the following environments. Please make sure to only use the product in appropriate environments. Interference immunity... -
Page 124: Technical And Visual Modifications As Well As Misprints Reserved
Recommended Separation Distance Between Portable and Mobile HF Communication Equipment and ERGO-FIT Devices ERGO-FIT products are intended for use in electromagnetic environments with controlled HF disturbances. To prevent electromagnetic interference make sure to maintain the minimum distance between portable and mobile HF communication equipment and the product according to the output power of the communications equipment as indicated below. -
Page 125: Electromagnetic Emission And Interference Immunity
The ERGO-FIT devices of the CARDIO LINE 4000/4100, 4000/4100 S, 4000/4100 S MED and 4000/4100 MED series are classified as protection class I devices. The ERGO-FIT devices of the CARDIO LINE 4000 SP and 4000 S SP series are classified as protection class II devices. -
Page 126: Mark Of Conformity
Appendix For ERGO-FIT machines the most suitable distance to be maintained is 1.5 meters. With this distance, two training devices cannot be connected conductively by a person and it is unlikely that users will receive an electric shock during workout. -
Page 127: Technical And Visual Modifications As Well As Misprints Reserved
Foreign matter protection: medium-sized objects (diameter greater than 12.5mm) Water protection: Water dripping vertically Electrical waste Please note user manual 1 2 1 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 128: Symbols
Appendix A.5.3 Symbols The symbols used for ERGO-FIT machines comply with the IEC 417 and IEC 878 standards. The following symbols are used: Alternate current Protective earth conductor Grounded Potential equalization Protection class II classified Refer to documentation Off (supply connection) -
Page 129: Error Margins
Display right of rpm/speed 5% range 10% range Points 10% range 10% range Arrows Deviation > 10% Deviation > 10% 1 2 3 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 130: Test Evaluation
Appendix Test Evaluation Fitness level 9 means a “very good” condition. An Olympic Champion would have fitness level 18. 1 2 4 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 131: Warranty
Warranty 2-year warranty (see general terms an conditions, point 8.1 guarantee „ERGO-FIT grants 2 years guarantee for its own products. In the first year the travel expenses and occurring working hours within Germany are borne in addition to the spare parts. In the second year only the spare parts. For merchandise the guarantee provisions of the respective manufacturer apply accordingly“) -
Page 132: Technical And Visual Modifications As Well As Misprints Reserved
⊗ pedals ⊗ seat and foot plates, handles ⊗ fuses ⊗ freewheel Improper maintenance will void the warranty! 1 2 6 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 133: Technical And Visual Modifications As Well As Misprints Reserved
Operator: Facility: __________________________________________ Contact: __________________________________________ Address: __________________________________________ Zip, City: __________________________________________ Manufacturer: ERGO-FIT GmbH & Co. KG, Blocksbergstraße 165, D-66955 Pirmasens Device Identification Device name: ___________________________________________ Model: ___________________________________________ Serial number: ___________________________________________ ___________________________________________ Measuring method and evaluation: Guide to metrological controls (LMK) -
Page 134: Technical And Visual Modifications As Well As Misprints Reserved
Measured values see following page(s) Metrological control i.o.; annual designation of sealing Metrological control not i.o.; old sealing obliterated _______________________________ Signature 1 2 8 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 135: Technical And Visual Modifications As Well As Misprints Reserved
Date, type and consequence of the defect and repeated identical operating fault: _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ Reports of incidents to authorities and manufacturer: ________________________________________________________________________ ________________________________________________________________________ 1 2 9 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 136: Technical And Visual Modifications As Well As Misprints Reserved
Appendix 1 3 0 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 137: Entry In Medical Devices Registry
All users must be informed of warnings and safety instructions. The manufacturer will not be liable for personal injuries or property damage. 1 3 1 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 138: Technical And Visual Modifications As Well As Misprints Reserved
All users must be informed of warnings and safety instructions. The manufacturer will not be liable for personal injuries or property damage. 1 3 2 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 139: Technical And Visual Modifications As Well As Misprints Reserved
All users must be informed of warnings and safety instructions. The manufacturer will not be liable for personal injuries or property damage. 1 3 3 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 140: Technical And Visual Modifications As Well As Misprints Reserved
All users must be informed of warnings and safety instructions. The manufacturer will not be liable for personal injuries or property damage. 1 3 4 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 141: Technical And Visual Modifications As Well As Misprints Reserved
All users must be informed of warnings and safety instructions. The manufacturer will not be liable for personal injuries or property damage. 1 3 5 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 142: Technical And Visual Modifications As Well As Misprints Reserved
All users must be informed of warnings and safety instructions. The manufacturer will not be liable for personal injuries or property damage. 1 3 6 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 143: Technical And Visual Modifications As Well As Misprints Reserved
All users must be informed of warnings and safety instructions. The manufacturer will not be liable for personal injuries or property damage. 1 3 7 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 144: Technical And Visual Modifications As Well As Misprints Reserved
Appendix 1 3 8 © 2018 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 146 ERGO-FIT GmbH & Co. KG Blocksbergstraße 165 – D-66955 Pirmasens Tel.: +49 (6331) 2461-0 – Fax: +49 (6331) 2461-55 info@ergo-fi t.de – www.ergo-fi t.de...