Related Manuals for ERGO-FIT Cardio Line 4000
Summary of Contents for ERGO-FIT Cardio Line 4000
- Page 1 O w n e r ‘ s m a n u a l CAR- CARDIO LINE 4000 CARDIO LINE 4000 CARDIO LINE 4000 Please read this manual carefully before use and keep it in a safe place for future reference...
- Page 3 ERGOFIT GmbH & Co. KG. Trade marks: ERGO-FIT and the ERGO-FIT Logo are registered trade marks of ERGO-FIT GmbH & Co. KG. POLAR is a registered trade mark of POLAR Electro GmbH. All other trademarks used/shown in this text are trademarks of their respective owners and are thus protected.
- Page 4 Dear customer, Thank you for purchasing an ERGO-FIT training device. You are now the owner of a state-of-the-art training system that combines highest technical standards with easy- to-use functionality. This user manual provides information on several models. This means that you may find explanations that do not directly apply to your training device.
-
Page 5: Table Of Contents
Troubleshooting ..................91 Appendix ....................97 Please note: This user manual provides information on several devices. Details may vary depending on your model! © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 7 CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED Chapter 1: General Information ERGO-FIT Cardio Equipment at a Glance ........... 2 General Information on this Manual ............. 3 Parts Included in the Delivery ............... 3 Customer Service ................. 4 Please note: This user manual provides information on several devices.
-
Page 8: General Information
General Information ERGO-FIT Cardio Equipment at a Glance ERGO-FIT CARDIO LINE 4000 machines are intended to provide a cardiovascular workout while simultaneously exercising small (e.g. CIRCLE) and large (e.g. CROSS) muscle groups. ERGO-FIT cardio machines offer you best training possibilities, regardless of your age, gender or fitness level. -
Page 9: General Information On This Manual
CARDIO LINE 4100 S/S MED/MED General Information on this Manual Whether you are already familiar with ERGO-FIT workout equipment or whether you have not used our machines yet: This manual gives you important information. You can easily find the information you are looking for by searching the table of contents. - Page 10 General Information © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 11 Things to be Avoided ................... 11 Please note: This user manual provides information on several devices. Details may vary depending on your model! © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 12: Safety Instructions
Tip! operation. What You Need to Know When Using your Workout Equipment The information in this section applies to all CARDIO LINE 4000/4100 S/SP/S SP and CARDIO LINE 4000/4100 MED/S MED machines. General Information ⊗ Carefully read this manual prior to using your product. - Page 13 When using the seat watch out for handles and moving parts. There is a risk of blunt injuries (e.g. hitting). ⊗ When adjusting the revolving unit use the adjusting lever on the yellow casing © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 14 Before each use, inspect pedals (footrest), guides, seat and casing for damage. In case of damage, have the machine repaired immediately. ⊗ Do not take your feet off the pedals during training. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 15 Press the emergency stop button only when you are about to fall. ⊗ If the display indicates an overheating of the isolating transformer (for further © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 16: Instructions For Safe Operation
Choosing the Right Place of Installation ⊗ The machine can be set up on any level and stable floor. Make sure that it stands firmly on the floor. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 17: What Needs To Be Considered In Case Of Repair
All users of the machine must familiarize themselves with the dangers and safety regulations. The manufacturer will not be liable for personal injury or property damage © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 18 Safety Instructions © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 19: Quick Reference
CARDIO LINE 4100 S/S MED/MED Chapter 3: Quick Reference Please note: This user manual provides information on several devices. Details may vary depending on your model! © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 20 For workouts in Profile, Cardio-/System or Test mode, please read the detailed instructions. Tests can be performed on CYCLE and TRAC machines only. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 21: Intended Use
CARDIO LINE 4100 S/S MED/MED Chapter 4: Intended Use Product Lines ....................16 4.1.1 CARDIO LINE 4000/4100, 4000/4100 S, 4000 S SP, 4000 SP ..... 16 4.1.2 CARDIO LINE 4000/4100, 4000/4100 S MED ..........16 Models ......................16 4.2.1 CIRCLE ....................... 16 4.2.2 CROSS ....................... -
Page 22: Intended Use
Intended Use Intended Use Product Lines The following ERGO-FIT cutting-edge product lines have been designed to meet highest expectations. 4.1.1 CARDIO LINE 4000/4100, 4000/4100 S, 4000 S SP, 4000 SP This product line offers stationary equipment for cardio-vascular workout. They are specially designed for use in professional facilities. - Page 23 4.2.7 TRAC TRAC is a treadmill for walking or running. The workout intensity can be modified in order to achieve optimum cardio-vascular results. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 24 ⊗ nausea ⊗ circulatory problems ⊗ ilness (heavily tiredness, lassitude, feeling of dizziness) ⊗ rapidly decreasing heart rate ⊗ rapidly decreasing/increasing blood pressure © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 25 5.5.6 STAIR ......................28 5.5.7 TRAC ......................28 Please note: This user manual provides information on several devices. Details may vary depending on your model! Technical and visual modifications as well as misprints reserved © 2012 by ERGO-FIT GmbH & Co. KG...
-
Page 26: Transport And Installation
& Co. KG directly or by an authorized freight forwarding company. After delivery, packaging will be collected and disposed by ERGO-FIT GmbH & Co. KG. If ERGO- FIT machines are delivered by a freight forwarder, the customer must dispose the packaging himself or may send it back to ERGO-FIT GmbH &... -
Page 27: Recumbent
5.1.7 TRAC Machine installation and setup should always be performed directly by ERGO-FIT or by an authorized service technician. This guarantees for a safe and proper operation. Inspect the running belt after setup or relocation and adjust it if necessary (see maintenance guidelines in chapter 9.1.7). -
Page 28: Ambient Temperature
Ambient Temperature ⊗ Your ERGO-FIT exercise machine may be used at an ambient temperature of +10°C to +40°C, a relative humidity of 30 to 75% (non-condensing) and an atmospheric pressure of 700 hPa to 1060 hPa without causing any problem. -
Page 29: Power Supply
(at least 1x24 hours per week) by a special charging power supply unit, which is available with ERGO-FIT, is indispensable. If the buffer time reduces and can no longer be kept up by charging the batteries should be replaced. -
Page 30: 5.4.3 Safety Cord
Step 2: Attach the magnet to the magnet contact switch. Magnet contact switch Please note: The treadmill can only be operated if the magnet is attached to the magnet contact switch. Bestandteile © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 31: Circle
3 Bottle holder 4 Foot rest 5 Power entry module 6 Leveling foot (must be adjusted because it is the machine’s support) 7 Control panel © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 32: Cycle
7 Bottle holder 8 Control panel 5.6.4 1 Seat 2 Seat back 3 Neck support 4 Power entry module 5 Pedals 6 Handlebar 7 Display © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 33: Recumbent
6 Power entry module Display 8 Bottle holder 5.6.6 STAIR 1 Support bar 2 Pedals 3 Power entry module 4 Bottle holder 5 Control panel © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 34: Trac
5 Key switch 6 Automatic circuit breaker 7 Control panel 8 Bar (optional contact heart rate electrodes) © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 35: Setup
6.4.1 The Buttons ....................41 6.4.2 The Display ....................41 Please note: This user manual provides information on several devices. Details may vary depending on your model! © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 36 Switching On ⊗ Before switching on your exercise machine, make sure the machine is plugged If you have connected several ERGO-FIT machines to one circuit never switch on multiple machines at the same time. Otherwise technical problems might occur. ⊗...
-
Page 37: Circle
CARDIO LINE 4100 S/S MED/MED The Right Workout Technique The heart rate controlled workout based on the ERGO-FIT point system makes sure that you exercise with optimum intensity. However, you should also take into account biomechanical considerations when exercising. This section provides information on relevant aspects for every cardio exercise machine. -
Page 38: Cross
Step on the pedals and grasp the handholds. Keep your upper body upright. Right from the start and during exercise, always make sure to stand firmly on © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 39: Cycle
To adjust the seat, stand next to the exercise machine and pull the adjustment lever on the seat post upwards. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 40 During CARDIO and points training make sure the number of rotations is higher than 50 rpm; otherwise the workload may become too high. For this purpose, © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 41: Mix
6.4.1). The intensity is displayed as step symbol with value indication. It is important that you maintain your individual pedaling frequency. Avoid repeated © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 42: Recumbent
The intensity control is not linked to the rotational speed. Maintain the workout position described here during the whole workout. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 43: Stair
Increase the speed of the treadmill slowly to avoid falling and to get used to the intensity. During workout, make sure not to get too close © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 44 The Control Panel ERGO-FIT exercise equipment is known for its outstanding ease of use. 4000/4100 S/S SP/MED/S MED machines for example are equipped with a user guidance system that is simple and easy to understand. The consistent control panel design provides highest comfort and guarantees easy handling.
- Page 45 The arrows on the left of the corporate symbol indicate the direction of insertion. The chip card reader's lifetime is about 100 000 insertion cycles. CARDIO LINE 4000 PROGRAMMAUSWAHL MANUAL PROFILES CARDIO MANUAL CD © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 46 Setup CARDIO LINE 4100 © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 47: The Buttons
RECUMBENT KCAL Calories burnt (average) kcal STAIR TIME Workout time 00:00 (min:s) PULSE Current heart rate per minute 1/min (only with POLAR transmitter) © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 48 TRAC KCAL Calories burnt (average) kcal TIME Workout time 00:00 (min:s) Current heart rate per minute PULSE 1/min (only with POLAR transmitter) Incline © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 49 7.5.2 Contact Heart Rate ..................71 7.5.3 Potential Interferences ................71 Please note: This user manual provides information on several devices. Details may vary depending on your model! © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 50: Operation
When you power on the device the first thing you see is the main menu with the following options: ⊗ MANUAL ⊗ PROFILES ⊗ CARDIO (CARDIO LINE 4000 S/S MED/S SP only) ⊗ MANUAL CD (MANUAL COUNTDOWN) ⊗ GEARSHIFT (CYCLE and RECUMBENT only) ⊗ TEST (TRAC series 4000 S/S SP/S MED only, CYCLE dependent on the test-mode) To return to the main menu press the STOP button once or several times. -
Page 51: Profiles
TRAC 0,2-25 km/h 0,1 km/h 0,2-25 km/h Instead of showing the default speed setting (1/min) the CROSS display indicates the current pedaling frequency (actual value). CARDIO LINE 4000 SP, 4000 S SP Machine type Power Range Increments Speed Increments CROSS... - Page 52 Profile 3: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Profile sections © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 53 You now access the workout mode. Here you can change the workload by pressing PLUS/MINUS. You can only use values within the previously defined © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 54 It is recommended to use a wireless chest belt for the CARDIO and TEST workout programs. Contact heart rate values are for information only. In order to determine the maximum and minimum heart rate values you have to perform an ERGO-FIT cardio test (CYCLE 4000 S, 4000 S SP, or 4000 S MED).
-
Page 55: Cardio
Now set the maximum heart rate. Change the default value by pressing PLUS or MINUS (the system changes the minimum heart rate accordingly). PULSMAX © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 56 The display shows the stored training data especially the number of points attained during the current workout. This keeps the user © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 57 PLUS/MINUS (default weight: 70 kg). Confirm your selection with START. You now access the workout mode. Press PLUS and MINUS to change the gears and thus to modify the workload. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 58 7.1.1.6 TEST* (CYCLE and TRAC only) * You will need the ERGO-FIT analysis software to perform a test. TEST is not standard with all models. It is only included in CYCLE and TRAC of the 4000 S, 4000 S MED, 4000 S SP series. The data resulting from this quick test are recommendations only and not suitable for diagnostic purposes.
- Page 59 STOP button. After the test the test results remain on the display. Press the STOP button to return to the main menu. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 60: Manual Countdown
Select a workout time from 0 to 60 minutes (default time: 20 minutes). You can increase / decrease the workout time by pressing PLUS and MINUS, or you can © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 61: Cardio
It is recommended to use a wireless chest belt for the CARDIO and TEST workout programs. Contact heart rate values are for information only. Perform an ERGO-FIT © 2012 by ERGO-FIT GmbH & Co. KG... - Page 62 Another advantage of chip card-based workout is that the user does not have to make any other modifications during workout. The ERGO-FIT chip card allows you to perform the ERGO-FIT cardio points training.
- Page 63 Now the CARDIO mode is displayed. Your current heart rate is determined. This may take a few seconds. When the heart rate is displayed workout starts with the initial workload. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 64 Press the START button to open the "Cardio parameters" window. Enter the © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 65: Profiles
(Watt, 1/min etc.), the heart rate graph and the performance graph remain on the display. By pressing STOP again you return to the main menu. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 66 ⊗ PWC 130/150/170 (sub maximum test with a heart rate 130/150/170), CYCLE 4000 marked „S“ in combination with an ERGO-FIT training software only. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 67 ⊗ Conconi-test (standard test for performance diagnostics), CYCLE and TRAC 4000 marked „S“ in combination with an ERGO-FIT training software only. Please proceed as follows: The trainer selects the test. Then the chip card is initialized. You can now start the test.
-
Page 68: Games
When you use the emergency stop feature remember to step on the side foot plates. Read the safety instructions in the appendix: © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 69: Functional Test
Heart Rate ⊗ Check the heart rate control (see chapter 7.5). Related Functions ⊗ Move the pedals forward and backwards to check their function. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 70: Cycle
Increase the speed range to its maximum. The resistance decreases. If this is the case the rpm-independent operation works fine. Heart Rate ⊗ Check the heart rate control (see chapter 7.5). Technical and visual modifications as well as misprints reserved © 2012 by ERGO-FIT GmbH & Co. KG... -
Page 71: Stair
⊗ Select MANUAL mode and increase the speed constantly (see Chapter 7.1.1). © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 72: Default Settings
You may set a cool down time from 20 s to 60 s (time from the maximum speed until the running belt stops completely). Setting the incline in the service menu (TRAC only) Setting “TOUR YES”: Incline -5% ... +15% © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 73: Cardio Line 4100
For further control additional icons are displayed. Unknown commands are listed as “ / “. Note: Not all ECG devices are compatible to CARDIO LINE 4000/4100. For further information please call +49 6331 2461-0 in Germany. - Page 74 You can switch on/switch off the acoustic signals by marking or unmarking the checkbox by touching it. Menu "Service" (this menu should only be operated by an ERGO-FIT service technician) Operation time: Here the previous operation time in km and minutes/hours are shown.
-
Page 75: Heart Rate Control
Clean the transmitter, especially the electrodes, after the workout using warm water and mild soap. Dry them thoroughly. Never brush the electrodes! Do not use alcohol for cleaning! © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 76: Contact Heart Rate
Operation Range of the POLAR Transmitter The operation range of the emitter is approx. 80 cm. If you have more than one ERGO-FIT exercise machine make sure to keep a distance of at least 100 cm between the machines to avoid interference of the transmitters. - Page 77 Weight Reduction – the Benefits ..............75 Workout Tips ....................76 Please note: This user manual provides information on several devices. Details may vary depending on your model! © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 78: Workout
It is a fact that regular exercise reduces the risk of heart diseases. In other words, regular workout improves the oxygen supply of the body and reduces the risk of cardiovascular diseases. For this reason, ERGO-FIT cardio workout equipment is used in training facilities and rehabilitation centers. -
Page 79: Choosing The Right Intensity
On CYCLE 4000/4100 S you can perform a test based on up-to-date results in sports science to determine values for an optimum workout that consider gender, age, weight © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 80 When exercising on our machines your heart rate should not exceed a certain maximum value. Optimum aerobic workout is only possible below this limit. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 81 9.1.7 TRAC ......................80 Cleaning ...................... 85 Please note: This user manual provides information on several devices. Details may vary depending on your model! © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 82: Maintenance
⊗ cables, connectors or casing are damaged ⊗ covers have dropped off. Maintenance of the machine may be carried out by the ERGO-FIT customer service. We also offer maintenance contracts. Maintenance and Care ERGO-FIT machines are low-maintenance products. The following chapters outline important inspections and maintenance procedures for different models. -
Page 83: Circle
⊗ Moving parts need no further oiling or greasing. ⊗ Once per week, remove dust from the chrome guide rod of the seat. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 84: Stair
Hill running and other running styles may cause a dislocation of the running belt. As long as the running belt centers again when running in normal mode at © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... - Page 85 The tension of the running belt must never exceed 0.5 %, as this may damage the belt, shafts and bearings. Make sure to unplug the machine before tensioning the running belt! © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 86 / low utilization, ca. 500 km ⊗ training facility / average utilization, ca. 1000 km ⊗ training facility / high utilization, ca. 1500 km Technical and visual modifications as well as misprints reserved © 2012 by ERGO-FIT GmbH & Co. KG...
- Page 87 Use the provided special oil and a 10ml-syringe. Only use the provided special oil (special oil is available on demand at ERGO-FIT)! Other oils or lubricants may damage the running belt and bearing surface and the treadmill might get damaged. Two syringes of 10 ml special oil are needed for every maintenance procedure.
- Page 88 1 mm left and right Make sure that the virtual extension of the photo sensor continues through the centre of the motor shaft. © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 89: Cleaning
During training with chip card regularly clean the chip cards and chip-card readers with a cloth and isopropanol. Special cleaning sets are also available with ERGO-FIT GmbH & Co.KG. © 2012 by ERGO-FIT GmbH & Co. KG... - Page 90 Maintenance © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 91: Troubleshooting
Finding the Error ..................92 10.2 Error Messages ................... 93 Please note: This user manual provides information on several devices. Details may vary depending on your model! Technical and visual modifications as well as misprints reserved © 2012 by ERGO-FIT GmbH & Co. KG... - Page 92 Troubleshooting Troubleshooting Despite the high quality of ERGO-FIT products malfunctions may occur. In this chapter you find troubleshooting information. If you suspect a technical malfunction do not operate the machine. If you can repair the machine yourself nevertheless inform us of the malfunction.
-
Page 93: Error Messages
CARDIO LINE 4000 S/S MED/MED/SP/S SP CARDIO LINE 4100 S/S MED/MED what exactly happened ⊗ Try to fix the error yourself (see: error messages) or contact the ERGO-FIT service center. 10.2 Error Messages The following section lists the most common error messages, their causes and... - Page 94 NO ID 01 or NO ID 17 or NO ID 19 or NO ID 20 Problem: The chip card used has not been evaluated. Solution: Evaluate the chip card using the ERGO-FIT analysis software first. You can only perform the ERGO-FIT point training with an evaluated card.
- Page 95 Problem: The lifting motor is overloaded. Solution: End the training and switch off the machine (keep it off for at least 10 min.). © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 96 Troubleshooting © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 97 CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED Chapter A: Appendix Customer Service ..................94 Spare Parts ....................94 Technical Specifications ................95 Electromagnetic Emission and Interference Immunity ......104 Safety Regulations .................. 108 A.5.1 Safety Instructions ..................108 A.5.2 Mark of Conformity ..................
-
Page 98: A Appendix
+49 (6331) 2461-29 Telefax: +49 (6331) 2461-55 E-Mail: service@ergo-fit.de ERGO-FIT machines are repaired by highly qualified service technicians. Only original spare parts are used for repairs. Spare Parts For Spare parts and up-to-date exploded views please contact the customer service at ERGO-FIT:... -
Page 99: Technical Specifications
CARDIO LINE 4100 S/S MED/MED Technical Specification CARDIO LINE 4000/4100 S/MED/S MED This chapter lists the technical specifications of your cardio machine. The tables contain information for CARDIO LINE 4000/4100, 4000/4100 S, 4000/4100 MED, and 4000/4100 S MED. Description CIRCLE... - Page 100 1 channel with ECG accuracy toring Heart rate dependent wor- With POLAR transmitter kload control Activation Max. user weight 200 kg / 150 kg Interface RS232 © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 101 CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED Description CYCLE Supply voltage 48-60 Hz 220 - 240 V ~ Power input 0,3 A Fuses T 1 A Power input 0,003 kW/h (4000/4000 MED) on standby mode...
- Page 102 1 channel with ECG accuracy toring Heart rate dependent wor- With POLAR transmitter kload control Activation Max. user weight 200 kg Interface RS232 © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 103 CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED Description RECUMBENT Supply voltage 48-60 Hz 220 - 240 V ~ Power input 0,3 A Fuses T 1 A Power input 0,003 kW/h (4000/4000 MED) on standby mode...
- Page 104 Max. user weight 200 kg Interface RS232 * For users with a body weight of more than 60kg walking speed may vary 1 0 0 © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 105 CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED Description TRAC Supply voltage 48-60 Hz 220 - 240 V ~ Power input 12 A Fuses T 16 A Power input 0,02 kW/h (4000 MED, load 75kg) on standby mode...
- Page 106 Appendix CARDIO LINE 4000 SP, 4000 S SP This chapter lists the technical specifications of your cardio machine. The tables contain information for CARDIO LINE 4000 SP and 4000 S SP. Description CROSS Supply voltage 48-60 Hz Power input Fuses...
- Page 107 CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED Description CYCLE Supply voltage 48-60 Hz Power input Fuses Safety standard DIN EN 60335-1 Device standard EN 957 SA Protection class II, IP21 Tested for use in Accuracy...
- Page 108 Heart rate dependent wor- With POLAR transmitter kload control Activation rpm-independent, rpm-dependent Max. user weight 200 kg Interface RS232 optional 1 0 4 © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 109: Electromagnetic Emission And Interference Immunity
CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED Electromagnetic Emission and Interference Immunity Electromagnetic Emission ERGO-FIT products are intended for use in the following environments. Please make sure to only use the product in appropriate environments. Emission Conformity... - Page 110 Appendix Electromagnetic Interference Immunity CARDIO LINE 4000/4100 S/MED/S MED ERGO-FIT products are intended for use in the following environments. Please make sure to only use the product in appropriate environments. Interference immunity IEC 60601- Conformity Electromagnetic environment test test level...
- Page 111 CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED Electromagnetic Interferrence Immunity CARDIO LINE 4000 SP, 4000 S SP ERGO-FIT products are intended for use in the following environments. Please make sure to only use the product in appropriate environments. Interference immunity...
- Page 112 Recommended Separation Distance Between Portable and Mobile HF Communication Equipment and ERGO-FIT Devices ERGO-FIT products are intended for use in electromagnetic environments with controlled HF disturbances. To prevent electromagnetic interference make sure to maintain the minimum distance between portable and mobile HF communication equipment and the product according to the output power of the communications equipment as indicated below.
-
Page 113: Safety Regulations
The ERGO-FIT devices of the CARDIO LINE 4000/4100, 4000/4100 S, 4000/4100 S MED and 4000/4100 MED series are classified as protection class I devices. The ERGO-FIT devices of the CARDIO LINE 4000 SP and 4000 S SP series are classified as protection class II devices. -
Page 114: Mark Of Conformity
Appendix For ERGO-FIT machines the most suitable distance to be maintained is 1.5 meters. With this distance, two training devices cannot be connected conductively by a person and it is unlikely that users will receive an electric shock during workout. - Page 115 CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED On the machine’s type label you can find the information listed in the below diagram (here CYCLE 4000 MED): Power supply Fuse CE mark © 2012 by ERGO-FIT GmbH & Co. KG...
-
Page 116: A.5.4 Symbols
Appendix A.5.4 Symbols The symbols used for ERGO-FIT machines comply with the IEC 417 and IEC 878 standards. The following symbols are used: Alternate current Protective earth conductor Grounded Potential equalization Protection class II classified Refer to documentation Off (supply connection) -
Page 117: Error Margins
CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED Error Margins In compliance with DIN VDE 0750-238 the following error margins apply for CYCLE and RECUMBENT machines of the 4000/4100 MED and 4000/4100 S MED series: The read-out error for power (p) may not exceed ± 5 % of the displayed value. -
Page 118: Test Evaluation
Appendix Test Evaluation Fitness level 9 means a “very good” condition. An Olympic Champion would have fitness level 18. 11 4 © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved... -
Page 119: Warranty
Warranty 2-year warranty ( see general terms an conditions, point 8.1 guarantee "ERGO-FIT grants 2 years guarantee for its own products. In the first year the travel expenses and occurring working hours within Germany are borne in addition to the spare parts. In the second year only the spare parts. For merchandise the guarantee provisions of the respective manufacturer apply accordingly") - Page 120 ⊗ adjusting lever ⊗ pedals ⊗ seat and foot plates, handles ⊗ fuses Improper maintenance will void the warranty! 11 6 © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
-
Page 121: Entry In Medical Devices Registry
Operator: Facility: __________________________________________ Contact: __________________________________________ Address: __________________________________________ Zip, City: __________________________________________ Manufacturer: ERGO-FIT GmbH & Co. KG, Blocksbergstraße 165, D-66955 Pirmasens Device Identification Device name: ___________________________________________ Model: ___________________________________________ Serial number: ___________________________________________ ______________________________________________________________ Measuring method and evaluation: Guide to metrological controls (LMK) ... - Page 122 Measured values see following page(s) Metrological control i.o.; annual designation of sealing: Metrological control not i.o.; old sealing obliterated _______________________________ Signature 11 8 © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 123 Registration of medical devices add-in card Operator: _____________________________________________ _____________________________________________ _____________________________________________ Designation of the medical device: _________________________________________________________ Functional test and introduction: Functional test carried out on:________________ by:__________________________________ Introduction carried out on:________________ by:__________________________________ Introduces person: ____________________________________ ____________________________________ ____________________________________ ____________________________________ Metrological controlls: at least every two years Next inspection: ______________________________________ by (person's name):...
-
Page 125: Declaration Of Conformity
CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED A.10 Declaration of Conformity EC Declaration of Conformity The following products: CIRCLE 4000/4100 CIRCLE 4000/4100 S CYCLE 4000/4100 CYCLE 4000/4100 S CROSS 4000/4100 CROSS 4000/4100 S MIX 4000... - Page 126 CE-authorized person for documentation: Alexander Harrer Address of authorized person for documentation: see address of manufacturer Issued by: Michael Resch (Managing Director) Pirmasens, 01.12.2011 1 2 2 © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 127 CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED EC Declaration of Conformity The following products: CYCLE 4000/4100 MED CYCLE 4000/4100 S MED RECUMBENT 4000/4100 MED RECUMBENT 4000/4100 S MED CIRCLE 4000/4100 MED CIRCLE 4000/4100 MED fulfil the requirements laid down in the following standards and guidelines •...
- Page 128 CE-authorized person for documentation: Alexander Harrer Address of authorized person for documentation: see address of manufacturer Issued by: Michael Resch (Managing Director) Pirmasens, 01.12.2011 1 2 4 © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 129 CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED EC Declaration of Conformity The following products: TRAC 4000/4100 MED TRAC 4000/4100 S MED fulfil the requirements laid down in the following standards and guidelines • MPG, MDD 93/42/EEC, Class IIa, Appendix II EC Medical Device Directive •...
- Page 130 All users must be informed of warnings and safety instructions. The manufacturer will not be liable for personal injuries or property damage. 1 2 6 © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 131 CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED Warnings CROSS 4000/4100 S/MED/S MED/SP/S SP ⊗ Read the user manual carefully before you start. ⊗ Before starting the exercise please check the power supply cord.* ⊗ Always connect the equipment to the power supply before using it and only use it after a proper functional test.
- Page 132 All users must be informed of warnings and safety instructions. The manufacturer will not be liable for personal injuries or property damage. 1 2 8 © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 133 CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED Warnings MIX 4000/4100 S/MED/S MED ⊗ Read the user manual carefully before you start. Before starting the exercise please check the power supply cord. ⊗ ⊗ Always connect the equipment to the power supply before using it and only use it after a proper functional test.
- Page 134 All users must be informed of warnings and safety instructions. The manufacturer will not be liable for personal injuries or property damage. 1 3 0 © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 135 CARDIO LINE 4000 S/S MED/MED/SP/ S SP CARDIO LINE 4100 S/S MED/MED Warnings STAIR 4000/4100 S/MED/S MED ⊗ Read the user manual carefully before you start. ⊗ Before starting the exercise please check the power supply cord. ⊗ Always connect the equipment to the power supply before using it and only use it after a proper functional test.
- Page 136 All users must be informed of warnings and safety instructions. The manufacturer will not be liable for personal injuries or property damage. 1 3 2 © 2012 by ERGO-FIT GmbH & Co. KG Technical and visual modifications as well as misprints reserved...
- Page 138 ERGO-FIT GmbH & Co. KG Blocksbergstraße 165 – D-66955 Pirmasens Tel.: +49 (6331) 2461-0 – Fax: +49 (6331) 2461-55 info@ergo-fit.de – www.ergo-fit.de...