Edit Name; Edit Access Code; Panel Functions; Communicator Options - Honeywell 6820EVS Installation And Optimization Manual
Addressable fire system
emergency voice system
Hide thumbs
Also See for 6820EVS:
- Basic operating instructions (5 pages) ,
- Installation and operation manual (216 pages) ,
- Manual (170 pages)
Table of Contents
Advertisement
LS10144-001SK-E
Display reads:
4.
Select the access code you wish to edit by pressing the up or down arrow key.
5.
Then press ENTER.
Profile Edit Menu
From the Profile Edit Menu you can change the users name, access code, and the panel functions that the user
will have access to with their code.
Note: Profile 1 (Fire Fighter's Key) the user name and access code can not be edited. Profile 2 (Installer) the
user name and panel functions can not be edited. Profile 3 (Multi-Site Installer) is defaulted with the Multi-
Site access option, but the entire profile can be edited.
6.2.5.1 Edit Name
6.
See Appendix B for a list of available characters and their numeric designators.
7.
Then press ENTER to finish.
6.2.5.2 Edit Access Code
8.
Enter new access code (minimum of 4 digits, maximum of 7 digit).
9.
Press ENTER.
10. Enter code again. Press ENTER.
6.2.5.3 Panel Functions
11. Press the up or down arrow key to move through the list of available functions.
12. Then press right arrow to move to Y (yes) or N (no) selection column.
13. Press the up or down arrow key to select Y or N.
14. Press ENTER.
15. Repeat steps 12 through 15 until user profile is complete.
6.2.6
Communicator Options
Communicator options provides the configuration for reporting events to a central station.
1.
From the main menu.
2.
Select 6 for Network Programming.
3.
Press 6 to enter Communicator Options menu.
6.2.6.1 Communicator Assignments
Each panel on the 6820/EVS communication link system specifies which communicator is used for reporting.
The communication link capability of the linked system allows all panels to use the same communicator
providing an economical solution for reducing the number of paths required for reporting purposes. A
communicator is specified by panel number. The communication link will be used to report events according to
the communicator report table.
Select Profile 01
Fire Fighter's Key
6-4
Network Management
Advertisement
Table of Contents
Troubleshooting
